Well. Season is ending and I'm moving to to try something a little different (still AI flavored). Started life as a 2018 AI AXSA in elite sand. Sent to GCP Rifle Co in Florida last December to have the vision chassis installed and to have it color matched elite sand. This rifle has served me extremely well over the last couple years (owned it for two years total). It has been used in matches but not abused. Normal wear on the arca rail and behind the ejection port. This is what is included:
AI AX in the AO chassis
Billet grip panels with thumb rest (small piece of plastic missing from it) and MDT vertical grip (screws look a little rough coating wise due to a match in a misty conditions)
Factory grip panels with AO thumbrest
LOP spacers
Full enclosed forend and full rail for forend
Factory AI bag rider deal
1x AW 308 mag with standard follower
Competition Trigger (new from AI in May)
Factory Trigger
Hoptic Saddle blanket
Option 1: everything above, but including a 27" Bartlein Mod400 7.5tw 6mmBRA barrel spun up by Fritz at black canyon customs and cerakoted matte gold. This barrel has 2010 rounds on it as it sits currently. Depending if it sells before or after this weekend, it will stay there or be at 2200. This barrel has exhibited extremely little throat erosion, should exceed 4K rounds, will probably go much further than that. Will ship with an Area 419 hellfire adapter, barrel is threaded 5/8x24.
This option includes approx 480+ pieces of 5x fired alpha 6BRA brass that has been annealed each firing, a SAC modular sizing die with a .263 and .266 bushing, and one AW mag with HRD kit that has fed flawlessly over the life of this barrel. Also have another 460-480 piece lot of Alpha BRA brass that has not been fired in this barrel that is all 2-3times fired.
Asking price on this setup is 7200 dollars. Shipped. Brass and die will ship separate. No seating die included. Can provide AMP code for buyer.
Option 2: no barrel and just a bare rifle with everything mentioned previous of option 1.
Asking price: 6300 shipped.
Rifle will ship in an inexpensive hard case to your FFL. Add 50 if it has to go from my FFL to yours.
I will accept PP f&f DISCREET. Will also accept postal money order but rifle will ship AFTER it clears my bank account. Willing to speak on the phone/ FaceTime with serious buyers.
I am local to northern Colorado as well and willing to meet a local buyer along the i-25 corridor from Colorado Springs to Cheyenne, Wyoming. Local sale will be a little cheaper.
Unless explicitly stated above, the following accessories seen in the photos below are NOT included.
AI AX in the AO chassis
Billet grip panels with thumb rest (small piece of plastic missing from it) and MDT vertical grip (screws look a little rough coating wise due to a match in a misty conditions)
Factory grip panels with AO thumbrest
LOP spacers
Full enclosed forend and full rail for forend
Factory AI bag rider deal
1x AW 308 mag with standard follower
Competition Trigger (new from AI in May)
Factory Trigger
Hoptic Saddle blanket
Option 1: everything above, but including a 27" Bartlein Mod400 7.5tw 6mmBRA barrel spun up by Fritz at black canyon customs and cerakoted matte gold. This barrel has 2010 rounds on it as it sits currently. Depending if it sells before or after this weekend, it will stay there or be at 2200. This barrel has exhibited extremely little throat erosion, should exceed 4K rounds, will probably go much further than that. Will ship with an Area 419 hellfire adapter, barrel is threaded 5/8x24.
This option includes approx 480+ pieces of 5x fired alpha 6BRA brass that has been annealed each firing, a SAC modular sizing die with a .263 and .266 bushing, and one AW mag with HRD kit that has fed flawlessly over the life of this barrel. Also have another 460-480 piece lot of Alpha BRA brass that has not been fired in this barrel that is all 2-3times fired.
Asking price on this setup is 7200 dollars. Shipped. Brass and die will ship separate. No seating die included. Can provide AMP code for buyer.
Option 2: no barrel and just a bare rifle with everything mentioned previous of option 1.
Asking price: 6300 shipped.
Rifle will ship in an inexpensive hard case to your FFL. Add 50 if it has to go from my FFL to yours.
I will accept PP f&f DISCREET. Will also accept postal money order but rifle will ship AFTER it clears my bank account. Willing to speak on the phone/ FaceTime with serious buyers.
I am local to northern Colorado as well and willing to meet a local buyer along the i-25 corridor from Colorado Springs to Cheyenne, Wyoming. Local sale will be a little cheaper.
Unless explicitly stated above, the following accessories seen in the photos below are NOT included.
Last edited:
