AICS 1.0 question
- Thread starter neo223
- Start date
Re: AICS 1.0 question
Yep.
More than a few folks have been known to dremel the "Hump" cheek rest off and install the 1.5 rest. The holes for the rest are already in the chasis.
Remove your skins and verify. Should be two on top of the chasis where the rest posts go and two threaded holes drilled side to side where the adjusting screws go.
Yep.
More than a few folks have been known to dremel the "Hump" cheek rest off and install the 1.5 rest. The holes for the rest are already in the chasis.
Remove your skins and verify. Should be two on top of the chasis where the rest posts go and two threaded holes drilled side to side where the adjusting screws go.
Re: AICS 1.0 question
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Anchor Zero Six</div><div class="ubbcode-body">Yep.
More than a few folks have been known to dremel the "Hump" cheek rest off and install the 1.5 rest. The holes for the rest are already in the chasis.
Remove your skins and verify. Should be two on top of the chasis where the rest posts go and two threaded holes drilled side to side where the adjusting screws go. </div></div>
Thank you sir for the quick reply. I assume then that I can replace the 1.0 skins with the 1.5 skins? not just the cheek rest.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Anchor Zero Six</div><div class="ubbcode-body">Yep.
More than a few folks have been known to dremel the "Hump" cheek rest off and install the 1.5 rest. The holes for the rest are already in the chasis.
Remove your skins and verify. Should be two on top of the chasis where the rest posts go and two threaded holes drilled side to side where the adjusting screws go. </div></div>
Thank you sir for the quick reply. I assume then that I can replace the 1.0 skins with the 1.5 skins? not just the cheek rest.
Re: AICS 1.0 question
Yeah that works as well.
Here I'll make it easy for you, follow the link for part numbers.
http://www.tacproshootingcenter.com/PDF/AI_ACC_PriceList_08.pdf
Yeah that works as well.
Here I'll make it easy for you, follow the link for part numbers.
http://www.tacproshootingcenter.com/PDF/AI_ACC_PriceList_08.pdf
Re: AICS 1.0 question
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: neo223</div><div class="ubbcode-body">Great picture. I assume no mods were neccessary.</div></div>
As stated, all you really need is the cheekpiece itself, and (strongly preferred) a set of AI cheekpiece thumbscrews:
http://store.accuracyinternationalsrt.co...humbscrews.html
And if you'd prefer not to cut-up your no-longer-produced 1.0 skins, you can always just order a set of 1.5 skins and drop them on.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: neo223</div><div class="ubbcode-body">Great picture. I assume no mods were neccessary.</div></div>
As stated, all you really need is the cheekpiece itself, and (strongly preferred) a set of AI cheekpiece thumbscrews:
http://store.accuracyinternationalsrt.co...humbscrews.html
And if you'd prefer not to cut-up your no-longer-produced 1.0 skins, you can always just order a set of 1.5 skins and drop them on.
Similar threads
