AICS stockside interchangeability?
- Thread starter Mr.Kirk
- Start date
Re: AICS stockside interchangeability?
No, with clarification
Ok let me clarify. The AICS skins for long and short are the same with the exception of the mag cut-out. This is done after it comes from the mold.
If you have a short action you can put it on a long action if you want to open up the mag area towards the muzzle and drill the appropriate hole for the front action screw.
The long action skins will bolt to a Short action but the mag cut-out is longer. All other skin cross screw locations bolt cut out is the same between AICS stocks.
AI stocks are a different story.
You can't mix 1.5 with 2.0.
No, with clarification
Ok let me clarify. The AICS skins for long and short are the same with the exception of the mag cut-out. This is done after it comes from the mold.
If you have a short action you can put it on a long action if you want to open up the mag area towards the muzzle and drill the appropriate hole for the front action screw.
The long action skins will bolt to a Short action but the mag cut-out is longer. All other skin cross screw locations bolt cut out is the same between AICS stocks.
AI stocks are a different story.
You can't mix 1.5 with 2.0.
Re: AICS stockside interchangeability?
Yes there is. The mag cutout on the bottom, action screw hole location and more than likely the cross chassis screw hole in front of the action.
Yes there is. The mag cutout on the bottom, action screw hole location and more than likely the cross chassis screw hole in front of the action.
Re: AICS stockside interchangeability?
As I understand it, all of the AI skins are the same basic piece of polymer, but they vary depending on where they're cut-whether short or long action, cut-out for the bolt handle/buttspike/etc. Generally speaking you need skins that are specific to the weapon's type and configuration - short-action AE skins won't work on a long-action AICS, etc.
As I understand it, all of the AI skins are the same basic piece of polymer, but they vary depending on where they're cut-whether short or long action, cut-out for the bolt handle/buttspike/etc. Generally speaking you need skins that are specific to the weapon's type and configuration - short-action AE skins won't work on a long-action AICS, etc.
Re: AICS stockside interchangeability?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HateCA</div><div class="ubbcode-body">
If you have a short action you can put it on a long action if you want to open up the mag area towards the muzzle and drill the appropriate hole for the front action screw.
The long action skins will bolt to a Short action but the mag cut-out is longer. All other skin cross screw locations bolt cut out is the same between AICS stocks.
</div></div>
That's what I was looking for.
Thanks
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HateCA</div><div class="ubbcode-body">
If you have a short action you can put it on a long action if you want to open up the mag area towards the muzzle and drill the appropriate hole for the front action screw.
The long action skins will bolt to a Short action but the mag cut-out is longer. All other skin cross screw locations bolt cut out is the same between AICS stocks.
</div></div>
That's what I was looking for.
Thanks
Similar threads
