Hey guys,
I setup a 60 PSI regulator to a 20LB propane bottle and used a Goss torch head to modify my machine. I had a buddy buy the same parts and he’s having issues getting propane through the torch. Then I realized he has an updated version of the torch.
I’ve seen on other threads guys are removing the needle valves out of fittings and from the torch but we’re still only getting a trickle after that.
Does anyone have a suggestion for a torch head that will allow the lower pressure <30 PSI to get adequate gas through the head?
thanks I’m advance!
I setup a 60 PSI regulator to a 20LB propane bottle and used a Goss torch head to modify my machine. I had a buddy buy the same parts and he’s having issues getting propane through the torch. Then I realized he has an updated version of the torch.
I’ve seen on other threads guys are removing the needle valves out of fittings and from the torch but we’re still only getting a trickle after that.
Does anyone have a suggestion for a torch head that will allow the lower pressure <30 PSI to get adequate gas through the head?
thanks I’m advance!
