Night Vision ANVIS mounting to Ground Helmets, ALL the Ground Helmets!

[I^2 Technologies - Peter]

Interface Block Adapters (IBA 1-3) for ANVIS Goggle mounting to ground helmets. Our IBAs interface with the ANVIS Mil Spec Mount Viewer and a standard quick release helmet plate to create the closest mounting option on the market today. With the Tilt mechanism on the ANVIS platform built into the goggles and not the mount, adapting ANVIS goggles to Ground Helmets has been problematic at best. One of the major hurtles was that the goggles were usually positioned too far from the users eye. So that, combined with the different forward angles of each helmet type, gave rise to the idea of a plate "dedicated" to each helmet style. The three major styles are the following. PASGT / Marine Corps Light Weight, ACH / MICH, Ops Core / Crye. The idea here was to keep the Mount Viewer as close to level as possible, giving the user the full rang of adjustments on the goggles themselves.

The three plates are as follows

IBA-1 PASGT / Marine Corps Light Weight
IBA-2 ACH / MICH
IBA-3 Ops Core / Crye



[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/img.photobucket.com\/albums\/v207\/IPSC_GUY\/055-3_zps308b1901.jpg"}[/IMG2]

This demonstrates the variance between the three major helmet patterns.

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/img.photobucket.com\/albums\/v207\/IPSC_GUY\/057-2_zpsd7fed935.jpg"}[/IMG2]

This shows an IBA-3 on an ops Core Ballistic helmet.

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/img.photobucket.com\/albums\/v207\/IPSC_GUY\/025-4_zps6fc0c9e3.jpg"}[/IMG2]

One of the strengths of the ANVIS system is how it stows the goggles in the up position.

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/img.photobucket.com\/albums\/v207\/IPSC_GUY\/022-2_zps9b0f72ba.jpg"}[/IMG2]

And the proof is in the pudding. This photo shows the goggles all the way forward.

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/img.photobucket.com\/albums\/v207\/IPSC_GUY\/166da762-8966-4c1d-839f-2e99fd341cbe_zps9e72ce06.jpg"}[/IMG2]

Mid Range

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/img.photobucket.com\/albums\/v207\/IPSC_GUY\/e34d4ccb-d73e-4f41-8722-725eac948b4c_zpsd5184c52.jpg"}[/IMG2]

And the most advantageous ALL the way back

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/img.photobucket.com\/albums\/v207\/IPSC_GUY\/99f6d042-06ab-40d1-b70e-95e61ae95846_zpsc01504b9.jpg"}[/IMG2]

Individual IBA's are priced at $175.00 includes all the screws necessary to install your Mount Viewer and quick detach Helmet Plate. We have all three patterns in stock, Please specify which type of Helmet shroud you are using.

 

[I^2 Technologies - Peter]

In response to email queries we have an offset kit for use with the Standard MICH / ACH helmet plates. If you have already purchased a mount and need to offset, contact me and I will send you one out free of charge.

 

[I^2 Technologies - Peter]

Starting in on a new run of the IBAs. Contact us now to get your name on the waiting list!