Are there any guys here on snipers hide that flutes model 700 bolts thanks Chad
Gunsmithing Anybody on the Hide flute bolts thanks
- Thread starter crod1972
- Start date
Re: Anybody on the Hide flute bolts thanks
seriously this gets asked almost once a week.
Karl Feldkamp at Kampfeld Customs is my recommendation.
seriously this gets asked almost once a week.
Karl Feldkamp at Kampfeld Customs is my recommendation.
Re: Anybody on the Hide flute bolts thanks
Try Marty at twistedbarrel.com
see their website
Try Marty at twistedbarrel.com
see their website
Re: Anybody on the Hide flute bolts thanks
Chad Dixon at LongRiflesInc is a forum member/vendor and he does them also.
C. Dixon from LongRiflesInc
Chad Dixon at LongRiflesInc is a forum member/vendor and he does them also.
C. Dixon from LongRiflesInc
Re: Anybody on the Hide flute bolts thanks
Here you go...
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=2994074#Post2994074
Here you go...
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=2994074#Post2994074
Re: Anybody on the Hide flute bolts thanks
Nobody in the industry flutes anything better than Karl at Kampfeld custom.
Kampfeld Custom's website
Mark
Nobody in the industry flutes anything better than Karl at Kampfeld custom.
Kampfeld Custom's website
Mark
Re: Anybody on the Hide flute bolts thanks
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: M.Gordon</div><div class="ubbcode-body">Nobody in the industry flutes anything better than Karl at Kampfeld custom.
Kampfeld Custom's website
Mark
</div></div>
Truer words have never been spoken!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: M.Gordon</div><div class="ubbcode-body">Nobody in the industry flutes anything better than Karl at Kampfeld custom.
Kampfeld Custom's website
Mark
</div></div>
Truer words have never been spoken!
Re: Anybody on the Hide flute bolts thanks
I recently saw a Kampfeld bolt for the first time. Yes, he does do a nice job. Well machined with virtually no toolmarks. I use a different cutter geometry. No real advantage or anything, just different. Its a flat root with 45* edges instead of a full radius.
I recently saw a Kampfeld bolt for the first time. Yes, he does do a nice job. Well machined with virtually no toolmarks. I use a different cutter geometry. No real advantage or anything, just different. Its a flat root with 45* edges instead of a full radius.
Re: Anybody on the Hide flute bolts thanks
Is there a distinct advantage for getting a bolt flutted, or is simply for cosmetic reasons? Don't get me wrong, I think it looks very nice, was just wondering if there is a performance reason such as cooling?
Is there a distinct advantage for getting a bolt flutted, or is simply for cosmetic reasons? Don't get me wrong, I think it looks very nice, was just wondering if there is a performance reason such as cooling?
Re: Anybody on the Hide flute bolts thanks
I just started taking a cnc milling class this semester, I wonder how hard that is to do.
I just started taking a cnc milling class this semester, I wonder how hard that is to do.
Re: Anybody on the Hide flute bolts thanks
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cpt. obvious</div><div class="ubbcode-body">I just started taking a cnc milling class this semester, I wonder how hard that is to do. </div></div>
about as easy as it gets.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cpt. obvious</div><div class="ubbcode-body">I just started taking a cnc milling class this semester, I wonder how hard that is to do. </div></div>
about as easy as it gets.
Re: Anybody on the Hide flute bolts thanks
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Skid</div><div class="ubbcode-body">Is there a distinct advantage for getting a bolt flutted, or is simply for cosmetic reasons? Don't get me wrong, I think it looks very nice, was just wondering if there is a performance reason such as cooling? </div></div>
people try to justify it will all sorts of silly ideas but when it comes down to it, it's just for looks.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Skid</div><div class="ubbcode-body">Is there a distinct advantage for getting a bolt flutted, or is simply for cosmetic reasons? Don't get me wrong, I think it looks very nice, was just wondering if there is a performance reason such as cooling? </div></div>
people try to justify it will all sorts of silly ideas but when it comes down to it, it's just for looks.
Re: Anybody on the Hide flute bolts thanks
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 300sniper</div><div class="ubbcode-body">
people try to justify it will all sorts of silly ideas but when it comes down to it, it's just for looks. </div></div>
Again, truer words have never been spoken!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 300sniper</div><div class="ubbcode-body">
people try to justify it will all sorts of silly ideas but when it comes down to it, it's just for looks. </div></div>
Again, truer words have never been spoken!
Re: Anybody on the Hide flute bolts thanks
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Cigarcop</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: M.Gordon</div><div class="ubbcode-body">Nobody in the industry flutes anything better than Karl at Kampfeld custom.
Kampfeld Custom's website
Mark
</div></div>
Truer words have never been spoken! </div></div>
Except when they said Chad Dixon instead
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Cigarcop</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: M.Gordon</div><div class="ubbcode-body">Nobody in the industry flutes anything better than Karl at Kampfeld custom.
Kampfeld Custom's website
Mark
</div></div>
Truer words have never been spoken! </div></div>
Except when they said Chad Dixon instead
Re: Anybody on the Hide flute bolts thanks
308Nate here did mine. Great guy, great work.
http://www.tiptopwebsite.com/websites/mb.php?offset=0&username=ssgcustomrifles&page=2
308Nate here did mine. Great guy, great work.
http://www.tiptopwebsite.com/websites/mb.php?offset=0&username=ssgcustomrifles&page=2
Re: Anybody on the Hide flute bolts thanks
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 300sniper</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cpt. obvious</div><div class="ubbcode-body">I just started taking a cnc milling class this semester, I wonder how hard that is to do. </div></div>
about as easy as it gets. </div></div>
Bout this hard. . .
%
O1004(M700 R/H SHORT HIGH FLUTE)
G20
G00G17G40G49G80G90
T1M06
M03S2000
G00G90G55X-0.94Y-0.89A0.
G43H01Z0.
M08
G01G41D01X-1.05Y-0.7835F5.
X-3.3A173.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A60.
G01X-1.05Y-0.7835F5.
X-3.3A233.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A120.
G01X-1.05Y-0.7835F5.
X-3.3A293.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A180.
G01X-1.05Y-0.7835F5.
X-3.3A353.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A240.
G01X-1.05Y-0.7835F5.
X-3.3A413.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A300.
G01X-1.05Y-0.7835F5.
X-3.3A473.25F15.
X-3.4Y-0.89
M09
M05
G91G00G28Z0.
G40X1.Y1.
G90G59G00X0.Y-13.
M00
Y0.
G55G90A0.
M30
%
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 300sniper</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cpt. obvious</div><div class="ubbcode-body">I just started taking a cnc milling class this semester, I wonder how hard that is to do. </div></div>
about as easy as it gets. </div></div>
Bout this hard. . .
%
O1004(M700 R/H SHORT HIGH FLUTE)
G20
G00G17G40G49G80G90
T1M06
M03S2000
G00G90G55X-0.94Y-0.89A0.
G43H01Z0.
M08
G01G41D01X-1.05Y-0.7835F5.
X-3.3A173.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A60.
G01X-1.05Y-0.7835F5.
X-3.3A233.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A120.
G01X-1.05Y-0.7835F5.
X-3.3A293.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A180.
G01X-1.05Y-0.7835F5.
X-3.3A353.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A240.
G01X-1.05Y-0.7835F5.
X-3.3A413.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A300.
G01X-1.05Y-0.7835F5.
X-3.3A473.25F15.
X-3.4Y-0.89
M09
M05
G91G00G28Z0.
G40X1.Y1.
G90G59G00X0.Y-13.
M00
Y0.
G55G90A0.
M30
%
Re: Anybody on the Hide flute bolts thanks
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: C. Dixon</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 300sniper</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cpt. obvious</div><div class="ubbcode-body">I just started taking a cnc milling class this semester, I wonder how hard that is to do. </div></div>
about as easy as it gets. </div></div>
Bout this hard. . .
%
O1004(M700 R/H SHORT HIGH FLUTE)
G20
G00G17G40G49G80G90
T1M06
M03S2000
G00G90G55X-0.94Y-0.89A0.
G43H01Z0.
M08
G01G41D01X-1.05Y-0.7835F5.
X-3.3A173.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A60.
G01X-1.05Y-0.7835F5.
X-3.3A233.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A120.
G01X-1.05Y-0.7835F5.
X-3.3A293.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A180.
G01X-1.05Y-0.7835F5.
X-3.3A353.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A240.
G01X-1.05Y-0.7835F5.
X-3.3A413.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A300.
G01X-1.05Y-0.7835F5.
X-3.3A473.25F15.
X-3.4Y-0.89
M09
M05
G91G00G28Z0.
G40X1.Y1.
G90G59G00X0.Y-13.
M00
Y0.
G55G90A0.
M30
%
</div></div>
Oh hell is that all? Man that does look easy. I mean shit just a few x and y's and bam, you got yourself some flutes!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: C. Dixon</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 300sniper</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cpt. obvious</div><div class="ubbcode-body">I just started taking a cnc milling class this semester, I wonder how hard that is to do. </div></div>
about as easy as it gets. </div></div>
Bout this hard. . .
%
O1004(M700 R/H SHORT HIGH FLUTE)
G20
G00G17G40G49G80G90
T1M06
M03S2000
G00G90G55X-0.94Y-0.89A0.
G43H01Z0.
M08
G01G41D01X-1.05Y-0.7835F5.
X-3.3A173.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A60.
G01X-1.05Y-0.7835F5.
X-3.3A233.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A120.
G01X-1.05Y-0.7835F5.
X-3.3A293.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A180.
G01X-1.05Y-0.7835F5.
X-3.3A353.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A240.
G01X-1.05Y-0.7835F5.
X-3.3A413.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A300.
G01X-1.05Y-0.7835F5.
X-3.3A473.25F15.
X-3.4Y-0.89
M09
M05
G91G00G28Z0.
G40X1.Y1.
G90G59G00X0.Y-13.
M00
Y0.
G55G90A0.
M30
%
</div></div>
Oh hell is that all? Man that does look easy. I mean shit just a few x and y's and bam, you got yourself some flutes!
Re: Anybody on the Hide flute bolts thanks
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: C. Dixon</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 300sniper</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cpt. obvious</div><div class="ubbcode-body">I just started taking a cnc milling class this semester, I wonder how hard that is to do. </div></div>
about as easy as it gets. </div></div>
Bout this hard. . .
%
O1004(M700 R/H SHORT HIGH FLUTE)
G20
G00G17G40G49G80G90
T1M06
M03S2000
G00G90G55X-0.94Y-0.89A0.
G43H01Z0.
M08
G01G41D01X-1.05Y-0.7835F5.
X-3.3A173.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A60.
G01X-1.05Y-0.7835F5.
X-3.3A233.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A120.
G01X-1.05Y-0.7835F5.
X-3.3A293.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A180.
G01X-1.05Y-0.7835F5.
X-3.3A353.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A240.
G01X-1.05Y-0.7835F5.
X-3.3A413.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A300.
G01X-1.05Y-0.7835F5.
X-3.3A473.25F15.
X-3.4Y-0.89
M09
M05
G91G00G28Z0.
G40X1.Y1.
G90G59G00X0.Y-13.
M00
Y0.
G55G90A0.
M30
%
</div></div>
Gold!
Glenn
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: C. Dixon</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 300sniper</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cpt. obvious</div><div class="ubbcode-body">I just started taking a cnc milling class this semester, I wonder how hard that is to do. </div></div>
about as easy as it gets. </div></div>
Bout this hard. . .
%
O1004(M700 R/H SHORT HIGH FLUTE)
G20
G00G17G40G49G80G90
T1M06
M03S2000
G00G90G55X-0.94Y-0.89A0.
G43H01Z0.
M08
G01G41D01X-1.05Y-0.7835F5.
X-3.3A173.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A60.
G01X-1.05Y-0.7835F5.
X-3.3A233.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A120.
G01X-1.05Y-0.7835F5.
X-3.3A293.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A180.
G01X-1.05Y-0.7835F5.
X-3.3A353.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A240.
G01X-1.05Y-0.7835F5.
X-3.3A413.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A300.
G01X-1.05Y-0.7835F5.
X-3.3A473.25F15.
X-3.4Y-0.89
M09
M05
G91G00G28Z0.
G40X1.Y1.
G90G59G00X0.Y-13.
M00
Y0.
G55G90A0.
M30
%
</div></div>
Gold!
Glenn
Re: Anybody on the Hide flute bolts thanks
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Varmint Slayer</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: C. Dixon</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 300sniper</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cpt. obvious</div><div class="ubbcode-body">I just started taking a cnc milling class this semester, I wonder how hard that is to do. </div></div>
about as easy as it gets. </div></div>
Bout this hard. . .
%
O1004(M700 R/H SHORT HIGH FLUTE)
G20
G00G17G40G49G80G90
T1M06
M03S2000
G00G90G55X-0.94Y-0.89A0.
G43H01Z0.
M08
G01G41D01X-1.05Y-0.7835F5.
X-3.3A173.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A60.
G01X-1.05Y-0.7835F5.
X-3.3A233.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A120.
G01X-1.05Y-0.7835F5.
X-3.3A293.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A180.
G01X-1.05Y-0.7835F5.
X-3.3A353.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A240.
G01X-1.05Y-0.7835F5.
X-3.3A413.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A300.
G01X-1.05Y-0.7835F5.
X-3.3A473.25F15.
X-3.4Y-0.89
M09
M05
G91G00G28Z0.
G40X1.Y1.
G90G59G00X0.Y-13.
M00
Y0.
G55G90A0.
M30
%
</div></div>
Oh hell is that all? Man that does look easy. I mean shit just a few x and y's and bam, you got yourself some flutes! </div></div>
So easy, a Cave Man can do it!
To some it looks like Hellen Keller tried to type something ( that's what I thought the first time I stepped in front of the controller at Lynwood's shop).
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Varmint Slayer</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: C. Dixon</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 300sniper</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cpt. obvious</div><div class="ubbcode-body">I just started taking a cnc milling class this semester, I wonder how hard that is to do. </div></div>
about as easy as it gets. </div></div>
Bout this hard. . .
%
O1004(M700 R/H SHORT HIGH FLUTE)
G20
G00G17G40G49G80G90
T1M06
M03S2000
G00G90G55X-0.94Y-0.89A0.
G43H01Z0.
M08
G01G41D01X-1.05Y-0.7835F5.
X-3.3A173.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A60.
G01X-1.05Y-0.7835F5.
X-3.3A233.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A120.
G01X-1.05Y-0.7835F5.
X-3.3A293.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A180.
G01X-1.05Y-0.7835F5.
X-3.3A353.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A240.
G01X-1.05Y-0.7835F5.
X-3.3A413.25F15.
X-3.4Y-0.89
G00X-0.94Y-0.89A300.
G01X-1.05Y-0.7835F5.
X-3.3A473.25F15.
X-3.4Y-0.89
M09
M05
G91G00G28Z0.
G40X1.Y1.
G90G59G00X0.Y-13.
M00
Y0.
G55G90A0.
M30
%
</div></div>
Oh hell is that all? Man that does look easy. I mean shit just a few x and y's and bam, you got yourself some flutes! </div></div>
So easy, a Cave Man can do it!
To some it looks like Hellen Keller tried to type something ( that's what I thought the first time I stepped in front of the controller at Lynwood's shop).
Re: Anybody on the Hide flute bolts thanks
Yeah, I looked it over, couldn't find a Z anywhere...
Yeah, I looked it over, couldn't find a Z anywhere...
Re: Anybody on the Hide flute bolts thanks
Try Paul for bolt and barrel fluting.
http://proprecisionrifles.com/index.html
Try Paul for bolt and barrel fluting.
http://proprecisionrifles.com/index.html
Re: Anybody on the Hide flute bolts thanks
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Mike Casselton</div><div class="ubbcode-body">Yeah, I looked it over, couldn't find a Z anywhere... </div></div>
middle of the bolt body is z0 and he's ramping in/out in the xy and feeding in the xa. x0 is somewhere on the right side of the part but i'm not sure where y0 is. even after the ramp in, it looks like he is cutting air if y0 is the back side of the bolt body itself.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Mike Casselton</div><div class="ubbcode-body">Yeah, I looked it over, couldn't find a Z anywhere...
middle of the bolt body is z0 and he's ramping in/out in the xy and feeding in the xa. x0 is somewhere on the right side of the part but i'm not sure where y0 is. even after the ramp in, it looks like he is cutting air if y0 is the back side of the bolt body itself.
Re: Anybody on the Hide flute bolts thanks
Look up the video I posted when we ran the GB.
Look up the video I posted when we ran the GB.
Re: Anybody on the Hide flute bolts thanks
Here is the video...
http://www.youtube.com/watch?v=7F0s41npxx0
Here is the video...
http://www.youtube.com/watch?v=7F0s41npxx0
Re: Anybody on the Hide flute bolts thanks
I might add that Chad (Longriflesinc)does excellent work... I have a 338 Edge that he built, and he has fluted a couple bolts for me all with perfection!!! One of the best guys I have delt with when it comes to gunsmith work, straight forward and no B.S.!!!!
I might add that Chad (Longriflesinc)does excellent work... I have a 338 Edge that he built, and he has fluted a couple bolts for me all with perfection!!! One of the best guys I have delt with when it comes to gunsmith work, straight forward and no B.S.!!!!
