Anyone with #14 M24 bartlein carbon?

[4O6shootist]

Can anyone get me a muzzle diameter at 24" m24 carbon? Trying to figure out if my slimline ats tuner will fit or if I need get the larger competition model.

 

[Supersubes]

Their contour chart says .900@ 26”.

 

[4O6shootist]

Their contour chart says .900@ 26”.

And taper of 006/" so for my desired finish at 23" will likely be around .918" I read that too, just unsure if the carbons finish at 900 in all lengths or if they're scaled up as you get shorter.

 

[Elite_KG]

I have a Bartlein 22” M24 Carbon Blank that is 0.900-0.902” at muzzle. Just measured it. The end is not very square unfinished so an accurate measure is difficult.

 

[4O6shootist]

I have a Bartlein 22” M24 Carbon Blank that is 0.900-0.902” at muzzle. Just measured it. The end is not very square unfinished so an accurate measure is difficult.

Perfect. The ats slimline says muzzle diameter of 890. I have one their hunter tuners ans they advertise no larger than a 750 muzzle, however inside the tuner body is almost 790. The slimline should work on the 900 M24 muzzle. If not I'll send it back. Thanks for your help!