Suppressors Apex Tactical Hard Sear for Smith M&P
- Thread starter ellespapa
- Start date
Re: Apex Tactical Hard Sear for Smith M&P
It's supposed to make the trigger pull lighter, and smoother. They are comming out with a striker, and other stuff to make the pull better (less gritty). I have no issues with the trigger, but a lot of folks hate them. I think the stock trigger is fine after the slack is taken up, and the trgger is "trapped and reset".
Here is a thread on it from the guys making the sear:
http://www.m4carbine.net/showthread.php?t=43713
It's supposed to make the trigger pull lighter, and smoother. They are comming out with a striker, and other stuff to make the pull better (less gritty). I have no issues with the trigger, but a lot of folks hate them. I think the stock trigger is fine after the slack is taken up, and the trgger is "trapped and reset".
Here is a thread on it from the guys making the sear:
http://www.m4carbine.net/showthread.php?t=43713
Re: Apex Tactical Hard Sear for Smith M&P
I have heard good things, but nothing first hand. I will be following this one. JPG
I have heard good things, but nothing first hand. I will be following this one. JPG
Re: Apex Tactical Hard Sear for Smith M&P
I ordered two. Installation is easy, punch out one roll pin, push out the sear retaining pin, swap sears, and put back together.
The trigger pull is enough different that I am kinda scared of it till I get some more time through the gun. The pre-travel has increased a lot, then the sear falls and the trigger reset is only about 1/8th of an inch. The trigger sear fall is light enough that out of 50rnds I have shot I pulled through the sear drop 3 times rather than staging it and pulling the sear only after the takeup.
No problems with it, kind of think I would like something in between factory and what they did. I do not have a trigger scale to measure.
I ordered two. Installation is easy, punch out one roll pin, push out the sear retaining pin, swap sears, and put back together.
The trigger pull is enough different that I am kinda scared of it till I get some more time through the gun. The pre-travel has increased a lot, then the sear falls and the trigger reset is only about 1/8th of an inch. The trigger sear fall is light enough that out of 50rnds I have shot I pulled through the sear drop 3 times rather than staging it and pulling the sear only after the takeup.
No problems with it, kind of think I would like something in between factory and what they did. I do not have a trigger scale to measure.
Re: Apex Tactical Hard Sear for Smith M&P
I installed two of them on my M&P's. My trigger pull is around 4.5lbs. The reset is at about an 1/8th of an inch. They have plans to release a duty sear spring which will increase the trigger pull by a pound on their sear. Honestly, its $30, buy it to see if you like it and if not dump it for a little under what you paid for it. I feel that the sear is WELL worth the $30 and would recommend it to anyone. I can't wait for the duty spring and the striker blocks. If you own an M&P keep an eye on these guys!
I installed two of them on my M&P's. My trigger pull is around 4.5lbs. The reset is at about an 1/8th of an inch. They have plans to release a duty sear spring which will increase the trigger pull by a pound on their sear. Honestly, its $30, buy it to see if you like it and if not dump it for a little under what you paid for it. I feel that the sear is WELL worth the $30 and would recommend it to anyone. I can't wait for the duty spring and the striker blocks. If you own an M&P keep an eye on these guys!
Re: Apex Tactical Hard Sear for Smith M&P
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dhutch</div><div class="ubbcode-body">Wow.....troll much? </div></div>Scott Flork is not a troll, he's one of the business partners that run Apex.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dhutch</div><div class="ubbcode-body">AND revive a 2 year old thread?! </div></div>The last post to this thread is 2/23/2010, that's 2 months old, NOT 2 years.
I have (3) M&P 9 guns, all of them have Apex kits. I'll probably never own a stock M&P, it's just that good.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dhutch</div><div class="ubbcode-body">Wow.....troll much? </div></div>Scott Flork is not a troll, he's one of the business partners that run Apex.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dhutch</div><div class="ubbcode-body">AND revive a 2 year old thread?! </div></div>The last post to this thread is 2/23/2010, that's 2 months old, NOT 2 years.
I have (3) M&P 9 guns, all of them have Apex kits. I'll probably never own a stock M&P, it's just that good.
Re: Apex Tactical Hard Sear for Smith M&P
I have one and it rocks, I run it in my production USPSA gun
I have one and it rocks, I run it in my production USPSA gun
Re: Apex Tactical Hard Sear for Smith M&P
I installed the apex hard sear and striker block on my M&P9. Trigger is perfect now!!!
I installed the apex hard sear and striker block on my M&P9. Trigger is perfect now!!!
Re: Apex Tactical Hard Sear for Smith M&P
fwiw,
Randy Lee is a perfectionist. Excellent work...
Regards, Matt Garrett.
fwiw,
Randy Lee is a perfectionist. Excellent work...
Regards, Matt Garrett.
