Gunsmithing AR10 6.5 Creedmoor Bolt Reccomendations

[JHARPE40]

So im seeing a lot of different options for Bolts in regards to 6.5 Creedmoor in LF (Large Frame) Ar's . My set up is going to have an 18" Criterion Barrel.
These are the options im looking @ which would you choose ?
1. LMT 308 Bolt and Carrier
2. JP Enterprises Bolt and Carrier
3. Lantac Bolt and Carrier


In regards to any other options. I would like to stick with the ones listed. Unless anyone has any failures with these 3 products. Pro/Cons greatly appreciated thanks in advance
_

 

[LANCER]

JP Enterprises High Pressure Bolt is what you want. Will work even with that Small Primer ammo without cratering. Can stick it in a JP carrier or someone else's, however make sure you get the small firing pin along with it.

 

[The Muffin Man]

just an FYI you might get better traction on this posting it in the semi auto rifles forum; I know I have seen quite a few discussions around large frame bolt recommendations going on over there.

 

[TRPrecision]

JP Enterprises High Pressure Bolt is what you want. Will work even with that Small Primer ammo without cratering. Can stick it in a JP carrier or someone else's, however make sure you get the small firing pin along with it.

I had alot of trouble with pierced primers regardless of load with a 22" 6.5. The JP bolt resolved all of the issues.