Arisaka LPBM

[013]

Anyone running the Arisaka LPBM?
Wondering if the quick release latch works well and if the mount feels solid when mounted.

https://arisakadefense.com/products/low-profile-bipod-mount

Any other low profile quick release options for the Harris bipod?

 

[013]

Nobody has one?

 

[Cascade Hemi]

What am I missing, how is that quick release?

 

[013]

What am I missing, how is that quick release?

You pull on the latch and it's supposed to release. Not sure exactly how it works (or if it works) and that is why I'm inquiring.

 

[013]

From installation instructions:

To install the bipod:

1. Slide the mount onto the Picatinny rail until it stops against the latch.
2. Ensure the canting adjustment is loosened.
3. Pull the latch away from the Picatinny rail using your finger.
4. Once the latch clears the Picatinny rail you may slide the mount to the desired position.
5. Release the latch and ensure it is fully inserted into one of the slots in the Picatinny rail.
6. Tighten the canting adjustment the desired amount.

To remove the bipod:

1. Loosen the canting adjustment.
2. Pull the latch away from the Picatinny rail using your finger.
3. Slide the mount (and bipod) off the Picatinny rail.

 

[JMcBurn]

Anyone running the Arisaka LPBM?
Wondering if the quick release latch works well and if the mount feels solid when mounted.

View attachment 7128373

https://arisakadefense.com/products/low-profile-bipod-mount

Any other low profile quick release options for the Harris bipod?

I would personally do the ADM Harris adapter. Short Action Precision sells them.

ADM Harris Bipod to Pic Rail 2 Piece Adapter - Short Action Precision

NEW 2 PIECE MODEL! - Clamp with Adapter The American Defense Manufacturing AD-BP-P2-STD adapter will replace the sling swivel stud mounting plate on your Harris Swivel bipod to allow you to use it on any Picatinny rail out there. It is the is built around their 170-S state of the art quick...

www.shortactionprecision.com

Edited

 

[013]

I would personally do the ADM Harris adapter. Short Action Precision sells them.

ADM Harris Bipod to Pic Rail 2 Piece Adapter - Short Action Precision

NEW 2 PIECE MODEL! - Clamp with Adapter The American Defense Manufacturing AD-BP-P2-STD adapter will replace the sling swivel stud mounting plate on your Harris Swivel bipod to allow you to use it on any Picatinny rail out there. It is the is built around their 170-S state of the art quick...

www.shortactionprecision.com

Thanks I'll check it out.