Ballistic app?

[Gobears16]

I’m using StrelokPro and i want to input my verified drops. Is there a way to do it in this app? Are there other apps where you can do this?

I feel I have put correct info in the app (muzzle velocity, BC, temp, altitude, etc) and I use a lab radar for correct muzzle velocity. I find that the app is giving me info that puts me .3-.4 miles low passed 500 yards. I have a verified 100 zero and rifle shoots .5 MOA. The groups at long range are still holding but always low.

Is my input info incorrect/not enough? I like the idea out inputting yardage and dial but it’s not lining up with real world data on the steel.

Just thought I’d ask and see if you guys have a solution. Thanks for the help.

 

[hafejd30]

 

[hafejd30]

That’s 2 pics. Click on the icon circled in red and the other screen should pop up. Enter yards and drop. Will suggest a different speed. That’s how I do it

I’m tagging in here tho if anyone knows of a more efficient way to input multiple drop/ranges

 

[Gobears16]

Thank you for the response. I’ll try that out the next time in the field.

 

[hafejd30]

I generally sight in for 100 or 300 depending on rifle. Than shoot 300/500/800 yards to verify drop.

Since using my magneto speed the app has been very close. The old crony I had wasn't very accurate and I would have to adjust the speed and bc to fine tune the app. Usually can get all drops within 1/4 MOA to 800 just adjusting numbers on the app

 

[ForgeValley]

If I understand your question, it is generally accepted to adjust bc to true your software. Especially since you have chronoed and are confident in your muzzle velocity. You can true via velocity or bc on those screens above.

 

[Gobears16]

If I understand your question, it is generally accepted to adjust bc to true your software. Especially since you have chronoed and are confident in your muzzle velocity. You can true via velocity or bc on those screens above.

That’s exactly what I want to do but didn’t know how to do that on the app. Looks like you guys have helped me figure it out. I knew it had to be a simple fix

 

[WATERWALKER]

I got my MV from a MagnetoSpeed V3 & ran my numbers using TRASOL. They worked w/ no issues. At the last match I attended, another ‘Hider (thank you @Dthomas3523) ran my numbers through his Kestrel w/ AB to confirm & the numbers were almost unchanged. There were two instances where the numbers differed by .1. The furthest hit I recorded was at 900. I just missed at 1,000 & that was a missed wind call.