Barrett fieldcraft measurement needed

[bwahl]

Anyone have a Barrett fieldcraft that was threaded from factory? I need the dimensions of the flaring at the end so I can replicate that with a custom barrel.

 

[BurnOut]

Here ya go.

 

[bwahl]

Here ya go.

?

 

[BurnOut]

?

That's a link to a post with some Fieldcraft info. Specifically:

• The (flared) barrel shoulder diameter is .748" per my calipers.
• The (5/8-24) muzzle threads are quite long; from the face of the muzzle to the (flared) shoulder on the barrel is ~.670"

 

[bwahl]

That's a link to a post with some Fieldcraft info. Specifically:

• The (flared) barrel shoulder diameter is .748" per my calipers.
• The (5/8-24) muzzle threads are quite long; from the face of the muzzle to the (flared) shoulder on the barrel is ~.670"

Thanks but I got that info. I need the flare dimensions.

From the shoulder back to the radial. How long does it run at .748" before the radial?

 

[BurnOut]

Thanks but I got that info. I need the flare dimensions.

From the shoulder back to the radial. How long does it run at .748" before the radial?

Ah. Will try to get you some answers this weekend, if no one gets them to you before then.

 

[bwahl]

Ah. Will try to get you some answers this weekend, if no one gets them to you before then.

I got the measurements. Thanks