Parting out beloved MK12 upper - everything must go
Zelle - Venmo - PP FF accepted - I ship same or next day in most cases. Prices are shipped
Only trades accepted:
black Radian Raptor 5.56 charging handle
black B5 systems bravo stock
1. BCM M4 Upper receiver / Douglas 5.56 NATO 1:7 twist SPR Profile barrel 1/2-28 threaded muzzle - chambered by Compass Lake Engineering - 1,500 - 2,000 rounds of 77 grain down the pipe, slow to moderate precision firing schedule. Will accept Allen Engineering Brake/collar for AEM5/OCM5 suppressors. Shoots nice tight 3/4" MOA groups with 77gr factory match ammo. Slightly better with reloads. Upper receiver face was lapped prior to barrel install; barrel extension bedded with Loctite 620 for a very tight and uniform mating surface. You're not separating the barrel from the upper without getting it extremely hot...therefore I'm selling this as a pair ------------------$300
2. PRI M84 Gas Buster charging handle - Ambi original latch - used - $75
3. Surefire Muzzle Brake 5.56 1/2-28 (suppressor adapter) - includes thick chamfered spacer, and a few shims - $100
4. Badger ordnance TDX Gas block 0.750" set screw style - used for 100 rounds - $55
5. BRT EZ Tune Rifle Length Gas tube .093" - used for 100 rounds - $55
6. Geissele MK18 Handguard - 16.5" (black) - includes original box and hardware, manual etc - in excellent condition - $300
Zelle - Venmo - PP FF accepted - I ship same or next day in most cases. Prices are shipped
Only trades accepted:
black Radian Raptor 5.56 charging handle
black B5 systems bravo stock
1. BCM M4 Upper receiver / Douglas 5.56 NATO 1:7 twist SPR Profile barrel 1/2-28 threaded muzzle - chambered by Compass Lake Engineering - 1,500 - 2,000 rounds of 77 grain down the pipe, slow to moderate precision firing schedule. Will accept Allen Engineering Brake/collar for AEM5/OCM5 suppressors. Shoots nice tight 3/4" MOA groups with 77gr factory match ammo. Slightly better with reloads. Upper receiver face was lapped prior to barrel install; barrel extension bedded with Loctite 620 for a very tight and uniform mating surface. You're not separating the barrel from the upper without getting it extremely hot...therefore I'm selling this as a pair ------------------$300
2. PRI M84 Gas Buster charging handle - Ambi original latch - used - $75
3. Surefire Muzzle Brake 5.56 1/2-28 (suppressor adapter) - includes thick chamfered spacer, and a few shims - $100
4. Badger ordnance TDX Gas block 0.750" set screw style - used for 100 rounds - $55
5. BRT EZ Tune Rifle Length Gas tube .093" - used for 100 rounds - $55
6. Geissele MK18 Handguard - 16.5" (black) - includes original box and hardware, manual etc - in excellent condition - $300
Attachments
-
DSC05107.jpg1.5 MB · Views: 8
-
image_cropper_6D3E7947-2637-44E0-B154-5F0A190CF1BA-3895-000002B12744DD4A.jpg316.1 KB · Views: 6
-
image_cropper_B1C7D5F2-E3B7-4356-8316-4E06D3168C13-1657-000000F193012E89.JPG251.6 KB · Views: 5
-
IMG_7994.jpg1.3 MB · Views: 3
-
IMG_7995.JPG642.3 KB · Views: 4
-
IMG_8097.JPG543 KB · Views: 3
-
IMG_8098.JPG702.1 KB · Views: 4
-
IMG_8099.JPG518.9 KB · Views: 2
-
IMG_8100.JPG1.1 MB · Views: 3
-
IMG_8101.JPG859.2 KB · Views: 2
-
IMG_8102.JPG1.1 MB · Views: 3
-
IMG_8103.JPG941 KB · Views: 3
-
IMG_8104.jpg744.7 KB · Views: 4
-
IMG_9511.jpg499.3 KB · Views: 6