Bench mounted neck turners?

[thefitter]

I have seen all the hand held ones (Hart, K&M etc.,) that people frequently use a cordless drill with.

But I like the idea of a bench mounted unit, something I can set and leave in position.

Wilson makes some adapters for their case trimmer. And I think Redding has the same.

Giraud makes a meplat trimmer attachment for their case trimmer. Wish they made some sort of neck turner attachment as well.

Reviews, recommendations? I'd like to buy something once. Thanks

 

[Longshot38]

Re: Bench mounted neck turners?

Sinclair makes a unit that will spin the case for you but you still have to use the hand-held turning unit.

 

[Bluejazz]

Re: Bench mounted neck turners?

You might want to look at a Grizzly catalog and get a mini lathe and do your neck turning on that.

 

[thefitter]

Re: Bench mounted neck turners?

The unit does not have to be powered. I just don't want to have to hold the cutter or case in my hand.

 

[PJ BAD]

Re: Bench mounted neck turners?

Forster makes a neck turner attachment for their trimmer. Sinclair sells them.
Read about it here:http://snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1723219#Post1723219

 

[MALLARD]

Re: Bench mounted neck turners?

you can throw a c-clamp on your turner , then you can hold the c-clamp instead

what are you using to hold the case now ? a shell holder or Sinclair type device?

you can mount whatever your using to hold the shell to a vise , then you'd only be holding the neck turner and not the case.

do that and the c-clamp and you wouldnt be holding either.

or you can buy a lathe...

 

[Suasponte]

Re: Bench mounted neck turners?

I use K&M neck turning tools!

Have a vise I mounted to my bench leg that I clamp the turner in and sit my fat ass in the chair with the drill and go to town!

I beleive this is the vise I got from harbor freight.
Vise from Harbor Freight

Terry