Bix - Andy trigger on a Vudoo

[nesikabay]

Anyone used one and how is it. On a V22

 

[Hellbender]

I bought a 2 stage for mine, but it's not here yet (my V22).
I asked in the V22 thread if the standard size BnA sear will work, but no-one responded.

Only worry I have is how they will hold up in the dirty rimfire environment, they say to run them completely dry, which I like.

I"ve fought Jewells before in the dirt, and don't want the headache.

 

[Seandradamus]

I’ve run one for a year now , it’s awesome and no issues at all

 

[47guy]

I two have had one on my v22 for about 8mos with no issues...been running one on my center fire for a few years never cleaned and no issues.

 

[Hellbender]

Did you guys use the standard height sear?

There's a whole video and chart on choosing the correct sear.

https://bulletcentral.com/bixn-andy-sear-compatibility/

 

[47guy]

I just ordered the two stage tac sport and put the flat shoe in it works perfect

 

[rick137]

A Bix’n Andy TacSport PRO Rem700 Two Stage Trigger for a V-22 requires a low top sear if the V-22 requires same height as Rem 700.

Am I correct?

 

[Dirtracer151]

I ordered a tacsport pro single stage for mine. It wouldn't hold the sear when closing the bolt hard unless i gave it excessive bottom sear engagment which in turn made the trigger creepy. I tried the different top sears and it didnt help. I put it in my Surgeon and adjusted appropriately and it works fine.

Ended up just putting a Trigger tech diamond in the Vudoo and its worked great.

 

[flatland1]

I ordered a tacsport pro single stage for mine. It wouldn't hold the sear when closing the bolt hard unless i gave it excessive bottom sear engagment which in turn made the trigger creepy. I tried the different top sears and it didnt help. I put it in my Surgeon and adjusted appropriately and it works fine.

Ended up just putting a Trigger tech diamond in the Vudoo and its worked great.

I'm another very satisfied TT Diamond user, in both of my V-22 bbl'd actions - Kukri & Ranch. Have been using Jewell HVRs in all the previous 22RF bolt repeaters - Stiller 2500XR, two jelrod-converted 40X & 40XBs, and the first V-22 action that I barreled myself, all without a single problem. However, I'd purchased a couple of TT Primarys & a Special for M700 customs, and was so pleased with them that I wanted to try a Diamond - and am very thankful that I did.

 

[nesikabay]

All right flatland1 you have my vote. I have heard good reports on that trigger. That's what ill get

 

[gpstracker]

I have run the Bix TacSport (not PRO) single stage in my V-22 for almost a year with zero issues.