No issues I tried that and the benchrest trigger on my impact. Just make sure you maintain enough pin fall for adequate primer ignition. I obtained the minimum suggested pin fall from impact directly “We typically try to keep about .245 to .260 measureable firing pin travel from cocked to the fired position. We do this by measuring protrusion of the cocking piece behind the shroud when in the cocked position and the depth after firing, simply adding together. While this isn't a 100% true actual measurement, it is an easy number for me to communicate with accurately to a customer over the phone. I would not be afraid to run one that is in the .235ish ”. I run 0.235” of pin fall on the benchrest BnA and have never had any issues and my bolt close is what I feel is the perfect amount of cock on close and the right amount of timing.
I like the tacsport 2 stage but I wanted to go with a lighter single stage so I primarily run the benchrest single stage and keep the two stage in my pack as backup already on a trigger hanger.
