Im doing a repeater and using alpha mags.. Can you pls telm me which of the cutting edge bullets from 350-400grain i can run trough magazine and which is single feeding. Whats the max INSIDE oal alpha mags can give me?
Building 375CT
- Thread starter bjay
- Start date
Unless somebody on here actually owns one, your best bet is probably calling the proprietor Chris Parker (714-381-2885). You'll have to be diligent as he's hard to reach and customer service at ALPHA MAGS is sorely lacking. Delivery of his product can also be a LONG wait and frustrating.
Bjay,
I do have a few mags set aside for full builds.
Alpha mag approximate inside oal is 4.5.
I have a reamer that will make the 352gr Mtac L09 bullet seat at about 4.45.
I do have a few mags set aside for full builds.
Alpha mag approximate inside oal is 4.5.
I have a reamer that will make the 352gr Mtac L09 bullet seat at about 4.45.
352gr solids (CE) will be the heaviest that you can fit into an M310 or similar mag. Anything heavier you will be single feeding.
Tnx budd. Just ordered some 352
I usually shoot the 350 SMKs for anything <1k yards, 352s for <2k yards, and the 377s for anything 2k+. The 377s are really optimized for the CT if your barrel will spin them, but you're definitely not going to fit them in the mag.
Similar threads
