Rifle Scopes Bushnell Lrhs elevation question

Stjames9

Sergeant of the Hide
Full Member
Minuteman
Supporter
Jul 18, 2019
108
18
Montana
Hey Guys I recently purchased a Lrhs and a 20moa cant mount from Larue and cannot zero as I have bottomed the scope out... any suggestions? I have tried to google this but don’t find solid answers... is there a way to modify the scope to go lower? Any help is appreciated thanks!
 
That would be my first check. Remove the turret cover, loosen the zero stop or check that it runs freely. The LRHS does not have a ton of travel, but I have never had one bottom out on a 20 MOA base. That doesn't mean it can't happen, but I would bet on the zero stop. There should be a section in the owners manual about the zero stop.
 
  • Like
Reactions: clcustom1911
Th
That would be my first check. Remove the turret cover, loosen the zero stop or check that it runs freely. The LRHS does not have a ton of travel, but I have never had one bottom out on a 20 MOA base. That doesn't mean it can't happen, but I would bet on the zero stop. There should be a section in the owners manual about the zero stop.
This ended up being the problem thanks for your guys help!