• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

CFE pistol

rduckwor

Sergeant
Full Member
Minuteman
Oct 13, 2011
798
5,093
73
AL, USA
Well, this is the only pistol powder I have found in the last six months. It came in today. Hodgdon lists 7.4 grains as starting @ 1042fps for my 200Gr LSWC. 8.2 Gr @ 1142 for the upper limit.

I don't need that velocity so I am going to start at 5Gr and run to 7Gr in 0.5 increments. it is a tiny flattened disc powder that looks a lot like H335 except the grains are larger. Seems to have a high energy and low load density. The picture is 7 Gr in the pan and in the 45ACP case. Bears watching carefully to avoid the potential for a massive over charge when loading.

Chrono data when I get a chance to shoot it.

RMD
 

Attachments

  • xlarge.jpg
    xlarge.jpg
    209.9 KB · Views: 12
Last edited:
Here the velocity run from this AM. Seems bit snappy compared to WST, but I think 6.2-6.3 Gr might just get it done.

Burn rate is supposed to be between AutoComp and HS6, so much slower than WST.

45ACP - 200 Gr LSWC, 5" SIG 1911.
 

Attachments

  • large.jpg
    large.jpg
    18.1 KB · Views: 12