• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

CH4D and Lee Press

Re: CH4D and Lee Press

What thread do the dies have? If they're 1", CH may be able to make an adaptor for your press. If they're 1 1/4" x 12, remove the adaptor bushing in the press.
 
Re: CH4D and Lee Press

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Winchester 69</div><div class="ubbcode-body">What thread do the dies have? </div></div>

does not really matter as the Lee press takes both 7/8 and 1 1/4 so it will work
 
Re: CH4D and Lee Press

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dksd39</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Winchester 69</div><div class="ubbcode-body">What thread do the dies have? </div></div>

does not really matter as the Lee press takes both 7/8 and 1 1/4 so it will work </div></div>

Are you sure I know lee uses 1.25x14 on there 50 dies.
 
Re: CH4D and Lee Press

Redding has a 1" x 14 to 1 1/4" x 12 adaptor bushing if you need one.