• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Combination ARCA/Picatinny Tripod Mounting Options

64E

Private
Minuteman
Dec 7, 2020
89
38
USA
I am looking for a combination Arca/Pic mounting option for my Innorel RT90C with leveling base. Previously I had the field optics research mount (pictured) on it but have moved it to the Arctise 80C that I got as a lighter option for hunting. The field optics research mount is no longer made. I am aware of the Midwest Offroad plate the make for the 90C so you can use an Anvil 30 but anvil 30’s are unobtainium for now. Any other good options out there?
2444E46F-0D40-426B-A7DE-8B6DBE489177.jpeg
DA64FD46-0A93-4B61-8A43-5499AEF2DB3B.jpeg
2444E46F-0D40-426B-A7DE-8B6DBE489177.jpeg
 
I don't know about other options, but as an owner of the RT90/Midwest/Anvil 30 combo, it's worth the wait and effort to find one.
 
  • Like
Reactions: 64E
Innorel is Chicom company like leofoto. Leofoto just made a nockoff of the anvil, take a look at that.
 
Field Optics Research still makes the picatinny/Arca clamp: https://www.fieldopticsresearch.com...Lever-Clamp-with-Pan-Axis---NEW-x51632630.htm
They do not have it on the website, but they do make a flat plate that fits with their band clamp to adapt to other tripods with flat disk an 3/8 stud. I am sure you can call them and get one.

ILya
I should clarify. They still make a mount like the one in the picture but it has been re-designed. You can no longer remove the pan axis of their mount like I did.
 
Leophoto Rapid Lock MA-30

 
7B2ECC99-1FC0-4216-A941-F0426768B010.jpeg

Some modification required. I’m happy with the end result. TA-LBSC and TA-UPF from RRS.
 

Attachments

  • D930BE76-6018-475F-95DC-9CC72A46A4F0.jpeg
    D930BE76-6018-475F-95DC-9CC72A46A4F0.jpeg
    267.2 KB · Views: 58
You can see in the picture of the final assembly where I cut the bubble level off and colored the bare aluminum with a sharpie. Also used a 1/2 drill bit to remove the “step” of the center hole so it could sit flush.

1660278826533.jpeg
 
  • Like
Reactions: Joshua1:9b
Is the TA-LBSC adjustable to account for width variations of arca rails? The SC-LR clamp is, but RRS provides no info (or appropriate photos of the relevant side) on the TA-LBSC .