Current 7Rem Mag Loads

[UNCLEDAN25]

Hey guys I was looking for some help on a current load for my new 7Rem mag Build.
Here are some of the specs:
Rem700, Mcm Adjust-HTG w/M-5, Brux 1-9 Varmint contour-barrel 25" with a 3port muscle brake,NF 3.5-15HS
looking for maybe loads on the new hybrid 180VLDs, 168VLDs and the 168SMK, 162A-MAX, looking for around 3k velocity....
Saw a bunch of loads for this on previous threads but seemed a little out dated......newer slick powder?

Again Thanks in advance for your help.

 

[RobG]

Re: Current 7Rem Mag Loads

The "old" stand-bys still work; H4831, R22, R25, Retumbo, H1000, are all proven performers. I used to run 67g of R22 and the Amax for 3150, current load of 63g of R22 and a 180 smk for 2940.

 

[KYpatriot]

Re: Current 7Rem Mag Loads

Are y'all using mag primers or regular primers? I have a couple thousand Fed215 Match magnum primers, but haven't loaded for the 7 mag before. I assume I can get these to work...i hope...

 

[RobG]

Re: Current 7Rem Mag Loads

Yep, 215's is what I use.

 

[Big Dog Steel]

Re: Current 7Rem Mag Loads

I'm using H1000 with the 215M's. Shooting pointed 175 SMK's. Just started load development but preliminary results look good.