Dasher Mags/Mag Kit: ARC? AICS? Accurate?
- Thread starter Winny94
- Start date
I use an AICS mag with the primal rights kit and the Core/Seekins +2 follower with my 6BRA. Been having good success with it so far.
While I haven't tried the PVA mag kit, I don't like that the follower on that design has to ride up a "trough" on the spacer. IMO, more chance for debris to catch the follower and prevent it from traveling upwards. I want the follower to be as friction free as possible.
While I haven't tried the PVA mag kit, I don't like that the follower on that design has to ride up a "trough" on the spacer. IMO, more chance for debris to catch the follower and prevent it from traveling upwards. I want the follower to be as friction free as possible.
AICS pmags seem to work okay with the 6BRA. My wife's 6BRA is currently utilizing a pmag with success.
I don't think PVA or anyone for that matter has made a spacer kit for ARC mags. My experience is the ARC's nose dive dasher/BR when loaded up with 10 rounds. It feeds my SAUM and creedmoor great though.
HRD was working on an ARC kit, but I haven't seen it for sale yet.
Primal Rights and AICS has worked really well for me. Tune and polish the feed lips on the mag as well.
MDT is releasing 6BR/Dasher mags in the next few weeks. They sent me a prototype to test which I should have next week. Will be running 6BR
MK Machine makes an ARC follower that feeds 6BR/Dasher...I have 2 on the way to test
I run ARC mags with the MKM followers in my Dasher and BR perfectly....no spacer necessary. Have been running this for a year now without a hitch.
Also ran AICS mags with the PVA spacer just fine. I just prefer the size of the ARC mags now and only use those nowadays.
Also ran AICS mags with the PVA spacer just fine. I just prefer the size of the ARC mags now and only use those nowadays.
So they are... I guess I just scanned right over the crossed out lines and went straight the product description
I ran 6BRA in ARC mags for about a year. They fed fine with no spacer, but once they got dusty they locked up (not the follower, the internal case geometry). AICS mags with the Primal Rights spacer also worked well. I've currently switched over to AW mags running the HRD spacer kit and those feed the smoothest of all the options I've tried. Bighorn TL3 action with AW cut.
x2 or x3 on not having ARC mags work consistently in field conditions. I was finally bit enough times, and painfully enough, that I said never again.
I am currently using a AICS/Primal Rights and AW/HRD combo and like it. The AICS is slightly smoother for me, but of course gets in the way more often.
I am currently using a AICS/Primal Rights and AW/HRD combo and like it. The AICS is slightly smoother for me, but of course gets in the way more often.
