Gunsmithing DBM refit to a McM Egde stock

[Advokaten]

I have what might be a silly question,

I have a Roedale DMB and a Rem 700 SA Edge stock BDL,

could I have the inletting taken out to fit the Roedale?

/Chris

 

[darrenk75b]

Re: DBM refit to a McM Egde stock

Yes

 

[Advokaten]

Re: DBM refit to a McM Egde stock

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: darrenk75b</div><div class="ubbcode-body">Yes </div></div>

Thanks Darren,

quick follow up, have you had it done or seen a stock set ut like that,

any pics or threads to link to?

My intention is to build a driven game rifle in 358 Win, Rem 700 SA, tac bolt knob, about 22 inch barrel modest weight, A-tec moderator and back up sights for blod trail work and game hurt in trafic accidents.

/Chris

 

[ejg]

Re: DBM refit to a McM Egde stock

Fitted a few Roedale mag systems to our stocks. The remmy short action is very easy to fit if the bottom inlet is right for the drop plate BDL system. Just take the corners away a bit with a dremel or file. One thing to look out for is the
front and back height (distance between bottom metal and action) not important for drop plate but important to get the mag in the right position.
Roedale should be able to send you the measurements, or a pillar set with the right lengths.
edi