I'd like to look old school on my clone already have everything but a mount system. How would Dednutz one piece look? I'd like IBA or Texas BA set but a little pricey. Alternatives and suggestions appreciated.
Rifle Scopes Dednutz one piece on M40A1 clone? what u think?
- Thread starter furburner
- Start date
Re: Dednutz one piece on M40A1 clone? what u think?
It is quickly becoming my go to mount. It is lighter, cheaper, and at least as strong if not stronger than using both a base and ring system. The three I have so far have been very well made. The only down side is the cheesy name...
It is quickly becoming my go to mount. It is lighter, cheaper, and at least as strong if not stronger than using both a base and ring system. The three I have so far have been very well made. The only down side is the cheesy name...
Re: Dednutz one piece on M40A1 clone? what u think?
They're pretty ugly looking too. The local shop has them in stock and I think they are overpriced.
Some people I've talked to love them, but I can't get over their looks...
They're pretty ugly looking too. The local shop has them in stock and I think they are overpriced.
Some people I've talked to love them, but I can't get over their looks...
Re: Dednutz one piece on M40A1 clone? what u think?
Why not go with a Redfield Jr base and rings. They are reasonably priced and consistent with an early clone.
Just a thot.
Hope this helps.
Trilogymac
Why not go with a Redfield Jr base and rings. They are reasonably priced and consistent with an early clone.
Just a thot.
Hope this helps.
Trilogymac
Re: Dednutz one piece on M40A1 clone? what u think?
Butt ugly IMO. It looks like someone welded two split-collars to a piece of bar stock and called it a scope mount.
Keep saving for the real thing, or get a contemporary set of rings and bases.
Butt ugly IMO. It looks like someone welded two split-collars to a piece of bar stock and called it a scope mount.
Keep saving for the real thing, or get a contemporary set of rings and bases.
Re: Dednutz one piece on M40A1 clone? what u think?
I have them on my hunting rifles and love them. They work. Could care less how the look.
Eddie
I have them on my hunting rifles and love them. They work. Could care less how the look.
Eddie
Re: Dednutz one piece on M40A1 clone? what u think?
Ugly or not they are a 1/2 pound less weight to carry compared to a tactical steel base and ring set. They get you a lower to the bore as well.
Ugly or not they are a 1/2 pound less weight to carry compared to a tactical steel base and ring set. They get you a lower to the bore as well.
Re: Dednutz one piece on M40A1 clone? what u think?
i've got a love/hate thing with them as well. they are butt ugly, but very functional, and built like a tank.
anybody ever lapped them? wondering how true they are.
i've got a love/hate thing with them as well. they are butt ugly, but very functional, and built like a tank.
anybody ever lapped them? wondering how true they are.
Re: Dednutz one piece on M40A1 clone? what u think?
Two positive votes. Both from Tenn...
Just bustin yer chops, I was born there. ;^)
Michign seems to be split on the looks/function.
Two positive votes. Both from Tenn...
Just bustin yer chops, I was born there. ;^)
Michign seems to be split on the looks/function.
Re: Dednutz one piece on M40A1 clone? what u think?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Mike Casselton</div><div class="ubbcode-body">Two positive votes. Both from Tenn...
</div></div>
volunteers have to stick together!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Mike Casselton</div><div class="ubbcode-body">Two positive votes. Both from Tenn...
</div></div>
volunteers have to stick together!
Re: Dednutz one piece on M40A1 clone? what u think?
If you are not going to build a true clone and want lighter weight then I would get Talley Lightweights in the appropriate height and size.
If you are not going to build a true clone and want lighter weight then I would get Talley Lightweights in the appropriate height and size.
Re: Dednutz one piece on M40A1 clone? what u think?
I'm originally from Indiana, but the family is from Tennessee...
I like my DNZ products. They are CNC machined, so I think looking like they are "welded" is not an accurate description.
They eliminate the possibility of the rings being misaligned, and also eliminate the possibility of the rings loosening on the mount. Also, like the Talley Rings, they are made in the US of A (in North Carolina, for the DNZ).
I've never had one leave a mark on a scope, and as advertised, have never needed to lap the rings on a DNZ product.
The looks are not for everyone, but then neither is Guinness.
Go Big T!
Mark H.
I'm originally from Indiana, but the family is from Tennessee...
I like my DNZ products. They are CNC machined, so I think looking like they are "welded" is not an accurate description.
They eliminate the possibility of the rings being misaligned, and also eliminate the possibility of the rings loosening on the mount. Also, like the Talley Rings, they are made in the US of A (in North Carolina, for the DNZ).
I've never had one leave a mark on a scope, and as advertised, have never needed to lap the rings on a DNZ product.
The looks are not for everyone, but then neither is Guinness.
Go Big T!
Mark H.
Re: Dednutz one piece on M40A1 clone? what u think?
If they could embed a small bubble level in the rear of their 20M0A mount similar to the spur mount I think they would have something.
If they could embed a small bubble level in the rear of their 20M0A mount similar to the spur mount I think they would have something.
Re: Dednutz one piece on M40A1 clone? what u think?
Man these look awesome. Ive always wanted something like this. I wonder wich one would work on my Savage 10 with a 50mm objective?
Man these look awesome. Ive always wanted something like this. I wonder wich one would work on my Savage 10 with a 50mm objective?
Re: Dednutz one piece on M40A1 clone? what u think?
I to have one on my remmy 700p 300 winmag, ive used it at trainign for several years without any problems! no complaints here
I to have one on my remmy 700p 300 winmag, ive used it at trainign for several years without any problems! no complaints here
Re: Dednutz one piece on M40A1 clone? what u think?
Do these have a built in recoil lug? My only concern is how it attaches to the receiver. With my base+rings setup, I permanently bed the base to the receiver and switch out rings as I choose. I wouldn't want to permanently mount this to a rifle so I was wondering if the screws alone were enough to hold it in place.
Do these have a built in recoil lug? My only concern is how it attaches to the receiver. With my base+rings setup, I permanently bed the base to the receiver and switch out rings as I choose. I wouldn't want to permanently mount this to a rifle so I was wondering if the screws alone were enough to hold it in place.
Re: Dednutz one piece on M40A1 clone? what u think?
Hate the name, love the product. That's all I use on my T/C Encore barrels.
Hate the name, love the product. That's all I use on my T/C Encore barrels.
Re: Dednutz one piece on M40A1 clone? what u think?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: lennyo3034</div><div class="ubbcode-body">Do these have a built in recoil lug? I was wondering if the screws alone were enough to hold it in place. </div></div>
No lug and I have not had any issues using the supplied T15 screws torqued to 22-25 inch pounds per DNZ instructions.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: lennyo3034</div><div class="ubbcode-body">Do these have a built in recoil lug? I was wondering if the screws alone were enough to hold it in place. </div></div>
No lug and I have not had any issues using the supplied T15 screws torqued to 22-25 inch pounds per DNZ instructions.
Re: Dednutz one piece on M40A1 clone? what u think?
I install them daily at work and I plan on sticking a set on my hunting rifle. As noted above, they are well built and avoid the possibility of rear screws coming loose like on Leupold mounts.
I install them daily at work and I plan on sticking a set on my hunting rifle. As noted above, they are well built and avoid the possibility of rear screws coming loose like on Leupold mounts.
Re: Dednutz one piece on M40A1 clone? what u think?
Outstanding sub 3oz product, I use them on a couple rifles and have installed several for friends.
The cutout makes single feeding manageable with thick gloves.
Never needed to lap them, they're on paper @100yds every time, no ring marks but I use a feeler gauge to hold gap while torquing.
This is a plus, as most aluminum rings are hard anodized and lapping destroys the coating.
They are a solid choice if you use a dedicated scope on each rifle.
I think they'd look good on an M40A1 build & they'd work great.
Outstanding sub 3oz product, I use them on a couple rifles and have installed several for friends.
The cutout makes single feeding manageable with thick gloves.
Never needed to lap them, they're on paper @100yds every time, no ring marks but I use a feeler gauge to hold gap while torquing.
This is a plus, as most aluminum rings are hard anodized and lapping destroys the coating.
They are a solid choice if you use a dedicated scope on each rifle.
I think they'd look good on an M40A1 build & they'd work great.
