Reloading Equipment Delete

[Schw15]

Like it says looking for some 7mm- 300 win mag dies. Let me know what you have

 

[RTH1800]

Sir,
If you have problems finding them like I did I just use Redding 300 Win Mag bushing die with proper bushing for the 7MM and 300 Win seating die. Works fine. Good Luck with search.
RTH

 

[Schw15]

Sir,
If you have problems finding them like I did I just use Redding 300 Win Mag bushing die with proper bushing for the 7MM and 300 Win seating die. Works fine. Good Luck with search.
RTH

Did you change the stem from 30 cal to 7mm? Yeah thats what im leaning on. Did you buy multiple bushings to neck down or just do it all at once? 309 bushing. Ch4d tool has them for 109 for the set but idk about how great they are

 

[RTH1800]

Don't recall on the stem but doubt it was needed. I necked down in two steps.

 

[Schw15]

Don't recall on the stem but doubt it was needed. I necked down in two steps.

What bushings did you use? I already have a forester 300 win mag seater i was just going to put a 7mm stem in it

 

[RTH1800]

I really don't recall off the top of my head. Just divide it into thirds. It's not really critical. Likely can do it in one pass.

 

[Schw15]

Awesome thanks for the info. I have a 7mm rem mag i unscrewed it and necked some down in one step but i know bushings are different

 

[RTH1800]

If you have that you can use a 300 Win die as a body die and not even fool with the bushing die. Then use a 7mm or 300 seaater.

 

[Schw15]

Yeah didnt think about that. I would just have to find the sweet spot backing the die off . awesome