dpms 6.5 reloading help

[cvcustom]

ok guys looking for a starting load 140 amax for a 6.5 credmoor in a dpms semi auto

 

[bohem]

Re: dpms 6.5 reloading help

41.3gr H4350
140 Amax at 2.790 OAL


or

41.5gr H4350
140 BTHP Match Hornady @ 2.76" OAL


Start there and work around the powder charge but leave the bullets at that length. They both jump without any issue in a gasser. My last 6.5CM barrel on my bolt gun was jumping over 0.3" to the lands when I pulled the tube and it was still shooting well.

 

[TXBodean]

Re: dpms 6.5 reloading help

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bohem</div><div class="ubbcode-body">41.3gr H4350
140 Amax at 2.790 OAL


or

41.5gr H4350
140 BTHP Match Hornady @ 2.76" OAL


Start there and work around the powder charge but leave the bullets at that length. They both jump without any issue in a gasser. My last 6.5CM barrel on my bolt gun was jumping over 0.3" to the lands when I pulled the tube and it was still shooting well. </div></div>

What's a good bushing size to use if using Hornady Match Grade dies?