Re: dual MUM setup - how much?
I have been working on a Dual mum setup too for a while.
My intention is that it should be both dual and mono.
The transition betwen the two should only take seconds.
And the transition of a NV device down to the gun, should be done within seconds as well.
The placement of the individual NV kan be adjusted, as well as the tilt in the user position. Regardsless of where the tilt are in user position, the upper position remains the same.
So here is what I so far have come up with.
Possible will TNVC stock it later on, at least they have shown pretty big interest for the device anyway.
As there is no play in the system, and it's pretty advanced, this will NOT compete on the low end of the market.
with dual mums.
end of the market.
With single mum, please notice that the shooting eye is kept clear and unobstructed so it can be used with other divices, such as riflescopes, thermal devices etc without the need of folding up the NV device.
On the helmet its important that the NV don't go over the skull. So here is the upfolded position.
Closeup of the mechanical solution.
Everything is made out of 7075 aluminium, but still the weight is pretty low, and lower than the competitors that I know of.
QD mount behind the Aimpoint
And yes, fittings are made for PVS14 as well for those who prefers them.