Hello, I have a 338 edge built on a RH Lawton 7000 long action It has a wyatt ext box and some custom BDl bottom metal. I am using a std 700 long action follower.
The issue I am having is that when the bolt pushes the inside case it pops up and out of the action. Then when it pushes the outside case the bolt will push the round forward about 1/2" then as the nose of the bullet starts to rise to the chamber the case head drops down and the bolt over rides it.
Any suggestions as to fix this? Thanks Eric
The issue I am having is that when the bolt pushes the inside case it pops up and out of the action. Then when it pushes the outside case the bolt will push the round forward about 1/2" then as the nose of the bullet starts to rise to the chamber the case head drops down and the bolt over rides it.
Any suggestions as to fix this? Thanks Eric