Just wondering if you can fit a POF 416 lower onto a Colt 6920 upper? I've heard somethiing about Colt having non-standard fittings for the takedown pins. Just wondering if anyone has dealt with this? Thanks!
Fitting a POF 416 lower on a Colt 6920 upper.
- Thread starter captnmo
- Start date
Re: Fitting a POF 416 lower on a Colt 6920 upper.
if the pin sizes are different on the colt(some older ones are) then they make an adapter pin for it.
if the pin sizes are different on the colt(some older ones are) then they make an adapter pin for it.
Re: Fitting a POF 416 lower on a Colt 6920 upper.
This was only an issue on Colt lowers/uppers a few years ago that used a non-standard size front takedown pin. Colt has used standard 0.250" front takedown pins for a while now if your upper is a newer model. If you have access to the 6920 lower...any serial # over 55xxx should be standard pin size.
Like Scott said...if you would happen to have a large pin upper adapters are cheap and available. See here:
http://www.mapartsinc.com/productsDetail.asp?id=645
This was only an issue on Colt lowers/uppers a few years ago that used a non-standard size front takedown pin. Colt has used standard 0.250" front takedown pins for a while now if your upper is a newer model. If you have access to the 6920 lower...any serial # over 55xxx should be standard pin size.
Like Scott said...if you would happen to have a large pin upper adapters are cheap and available. See here:
http://www.mapartsinc.com/productsDetail.asp?id=645
Re: Fitting a POF 416 lower on a Colt 6920 upper.
Thanks guys! I put it on a DPMS lower just to see and it fits like a glove.
Thanks guys! I put it on a DPMS lower just to see and it fits like a glove.
