FN SPR A3G convert to mag

[BOL556]

Just curious if anyone has seen bottom metal for the A3G. Would like to convert my over to mag feed. Have searched around and found nothing. Everything is for the A1 or the A5 only. Thanks in advance for the replies.

 

[lazy21]

Re: FN SPR A3G convert to mag

a1/a5 will be the same! you can go from a hinged floor plate to a DBM but not the other way around

 

[turbo54]

Re: FN SPR A3G convert to mag

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lazy21</div><div class="ubbcode-body">a1/a5 will be the same! you can go from a hinged floor plate to a DBM but not the other way around </div></div>

This is 99% correct. You can go from DBM to hinged floorplate, but it wont fit sweet in the inletting.

An A3G will require re-inletting to take either a dactory FN SPR DBM, or a CDI precision DBM, which will be costlier, but better. Goid luck.