For Sale: (2) sets of 30.06 Dies for sale used one time - $100, plus $15 Shipping, Paypal F & F
See specs below:
The Hornady Match Grade New Dimension Bushing 2-Die Set is designed to provide the ultra precision and match winning performance demanded by
serious shooters. The Match Grade Dies feature self centering, interchangeable neck sizing bushings, that are held to strict tolerances to
provide superior accuracy. This die set includes a Full-Length Sizing Die and Seating Die with Roll Crimp. Plastic storage box and two Sure-Loc
rings included. Shellholder sold separately.
Notes:
Sizing die features precision-polished elliptical expander to reduce friction and case-neck stretch.
Seating die features seater adjustment screw, built-in crimper, locking retainer spring as well as a floating bullet seater alignment sleeve and
seating stem, which pre-aligns the bullet and case before seating occurs.
Shellholder not included.
Use of Hornady Match Grade Neck and Full Length Dies and Bushings:
Hornady Match Grade dies have a separate, interchangeable neck size bushing (not included with die).
The dimension of the bushing (inside diameter, listed) determines the neck size when the brass is inserted into the die.
Standard dies size to SAAMI minimum specification and this is often not necessary, as a particular rifle, brass type and chamber may not need
minimum dimensions. Less sizing results in less working of the brass.
Using some loaded or dummy cartridges that fit the rifle's chamber without excessive play, measure the diameter of the case neck. Subtract .001"
from that diameter and the result should be a reasonable starting point for the correct bushing dimension. Select a size that is at that
dimension or just under it.
Bushings work in both the neck and full length Match Grade dies. The bushings are available in .001" increments.
Dillon Three-Die Rifle Die Sets include a sizing/ depriming die, a bullet seating die and a taper crimp die.
Sizing/Depriming Die - The sizing/depriming die is full-length, to minimum tolerances, sizing cases down to function in semi- and full-automatic
firearms. We strongly suggest that a headspace case gage be used to correctly adjust the size die.
The depriming assembly includes a carbide expander ball for "squeak-free," effortless neck expansion. This expander ball is located in the
middle of the depriming stem to take advantage of superior initial leverage for easier extraction. In the event of a stuck case, the design of
the depriming assembly allows it to function as a stuck case remover.
Bullet Seating Die - Our bullet seating die is internally designed to keep the bullet straight throughout the seating process. Once properly
adjusted, the only measurable runout will be that which is inherent in the bullet.
Taper Crimp Die - The taper crimp die is also specially configured to center both the case neck and the case body, thereby aligning the entire
cartridge for a more uniform crimp. Dillon Rifle Dies are designed to meet the more rigid requirements for both accuracy and precision demanded
by today's marksman. A taper crimp die is preferred for loading ammunition intended to be used in semiautomatic firearms with detachable box
magazines, and in lever-action firearms with tubular magazines.
See specs below:
The Hornady Match Grade New Dimension Bushing 2-Die Set is designed to provide the ultra precision and match winning performance demanded by
serious shooters. The Match Grade Dies feature self centering, interchangeable neck sizing bushings, that are held to strict tolerances to
provide superior accuracy. This die set includes a Full-Length Sizing Die and Seating Die with Roll Crimp. Plastic storage box and two Sure-Loc
rings included. Shellholder sold separately.
Notes:
Sizing die features precision-polished elliptical expander to reduce friction and case-neck stretch.
Seating die features seater adjustment screw, built-in crimper, locking retainer spring as well as a floating bullet seater alignment sleeve and
seating stem, which pre-aligns the bullet and case before seating occurs.
Shellholder not included.
Use of Hornady Match Grade Neck and Full Length Dies and Bushings:
Hornady Match Grade dies have a separate, interchangeable neck size bushing (not included with die).
The dimension of the bushing (inside diameter, listed) determines the neck size when the brass is inserted into the die.
Standard dies size to SAAMI minimum specification and this is often not necessary, as a particular rifle, brass type and chamber may not need
minimum dimensions. Less sizing results in less working of the brass.
Using some loaded or dummy cartridges that fit the rifle's chamber without excessive play, measure the diameter of the case neck. Subtract .001"
from that diameter and the result should be a reasonable starting point for the correct bushing dimension. Select a size that is at that
dimension or just under it.
Bushings work in both the neck and full length Match Grade dies. The bushings are available in .001" increments.
Dillon Three-Die Rifle Die Sets include a sizing/ depriming die, a bullet seating die and a taper crimp die.
Sizing/Depriming Die - The sizing/depriming die is full-length, to minimum tolerances, sizing cases down to function in semi- and full-automatic
firearms. We strongly suggest that a headspace case gage be used to correctly adjust the size die.
The depriming assembly includes a carbide expander ball for "squeak-free," effortless neck expansion. This expander ball is located in the
middle of the depriming stem to take advantage of superior initial leverage for easier extraction. In the event of a stuck case, the design of
the depriming assembly allows it to function as a stuck case remover.
Bullet Seating Die - Our bullet seating die is internally designed to keep the bullet straight throughout the seating process. Once properly
adjusted, the only measurable runout will be that which is inherent in the bullet.
Taper Crimp Die - The taper crimp die is also specially configured to center both the case neck and the case body, thereby aligning the entire
cartridge for a more uniform crimp. Dillon Rifle Dies are designed to meet the more rigid requirements for both accuracy and precision demanded
by today's marksman. A taper crimp die is preferred for loading ammunition intended to be used in semiautomatic firearms with detachable box
magazines, and in lever-action firearms with tubular magazines.
Attachments
Last edited:
