7mm Remington Short Action Ultra Magnum reloading components
I sold my 7mm SAUM and thought I sold all my ammo but was going through my ammo bins and found this extra box that still has 15 rounds of 7mm SAUM with 175gr Hornady ELD-X bullets that I had McCourt put together for me, they are loaded in Norma brass with Federal 210M primers and Hodgdon H1000 powder at COAL of 2.930" (fit inside my Alpha AICS style mags) with velocity average of 2936fps out of a 26" custom barrel. YMMV depending on your conditions and barrel, etc. I believe these are loads in virgin brass so they should fit inside your chamber without issue. I also have 25 additional 1x cases of Norma brass and 21 cases of R-P 2x brass.
I have a 3 piece set of Redding Type S Bushing Neck Sizing Die, body/shoulder die and bullet seater die with micrometer seating stem and shell holder for short mag cartridges, also have a custom made Lee Collet die for 7mm SAUM (they don't sell these in their normal lineup), I also have a .284 bullet collet for the Hornady bullet puller die and a Saturn 7mm powder funnel.
Great setup especially if you're just getting started with 7mm SAUM or looking to upgrade your current gear.
SOLD SOLD SOLD ----- for everything shipped via UPS Ground (ORM-D), all in great condition. Paypal FF preferred. I do not wish to split up everything but sell as a whole. PM me if you have questions.
I am selling other reloading equipment so check my other ads.
I sold my 7mm SAUM and thought I sold all my ammo but was going through my ammo bins and found this extra box that still has 15 rounds of 7mm SAUM with 175gr Hornady ELD-X bullets that I had McCourt put together for me, they are loaded in Norma brass with Federal 210M primers and Hodgdon H1000 powder at COAL of 2.930" (fit inside my Alpha AICS style mags) with velocity average of 2936fps out of a 26" custom barrel. YMMV depending on your conditions and barrel, etc. I believe these are loads in virgin brass so they should fit inside your chamber without issue. I also have 25 additional 1x cases of Norma brass and 21 cases of R-P 2x brass.
I have a 3 piece set of Redding Type S Bushing Neck Sizing Die, body/shoulder die and bullet seater die with micrometer seating stem and shell holder for short mag cartridges, also have a custom made Lee Collet die for 7mm SAUM (they don't sell these in their normal lineup), I also have a .284 bullet collet for the Hornady bullet puller die and a Saturn 7mm powder funnel.
Great setup especially if you're just getting started with 7mm SAUM or looking to upgrade your current gear.
SOLD SOLD SOLD ----- for everything shipped via UPS Ground (ORM-D), all in great condition. Paypal FF preferred. I do not wish to split up everything but sell as a whole. PM me if you have questions.
I am selling other reloading equipment so check my other ads.
Last edited:
