Grease impact 737 action?

[Majestic Gold Fish]

I understand Tate and crew over at impact like the Lucas red and tacky grease for their actions.

This is my first high end action, im sure im over thinking it but anyone have a diagram where I should grease and what parts need a little oil?

Im from the world of pistols, just want to make sure I start with good habits with this beauty. Thank you in advance!

 

[Supersubes]

Bolt lugs very sparingly, striker assembly threads, and cocking cam. Dont grease the bolt body or raceway at all.

 

[mark5pt56]

No picture but the main area is the rear of the bolt lugs. You could place a dab on the cocking piece. Borrowed from MDT.

 

[mark5pt56]

Another perspective, didn't watch.

 

[jthor]

I put LB 8012 on the back of the bolt lug and the rear cocking area. Additionally, when cleaning the bolt body I will wipe “Free All” penetrating oil on the body and wipe it off. Found that trick out by accident a few months ago.

 

[Dead Eye Dick]

In the old days, it was well known that XP100 bolts would gall without a slight dab of grease at the back of the locking lugs. Always worked and never an issue UNLESS,

In my mind, if you did not clean them often, they would pick up grit and grind away the action as you worked the bolt. (We shot a whole lots because our loads were light and barrels simply did not Seem to ever wear out)

I still follow this practice but as said, I make it a practice to throughly clean the outside of the bolt body, lugs and action to rid all of the old grease before applying fresh.

 

[Majestic Gold Fish]

Guys thank you very much!