anyone using this for the 105 to 115 bullets ?
thanks
thanks
- Thread starter Sendero_Man
- Start date
Re: H4831SC for 6x47
I tried it with 108's and it was accurate but couldn't get enough FPS.
Steve
I tried it with 108's and it was accurate but couldn't get enough FPS.
Steve
Re: H4831SC for 6x47
what do you use then ? I have heard and been told that 4350 is the go to powder.
what do you use then ? I have heard and been told that 4350 is the go to powder.
Re: H4831SC for 6x47
I use N-160 and R17,Search my posts.I put some of my loads up recently.
I had some temperature sensitivity with 4350 in my 6.5-284 years ago and quit using it.Maybe a bad batch of powder.I don't know?
Steve
I use N-160 and R17,Search my posts.I put some of my loads up recently.
I had some temperature sensitivity with 4350 in my 6.5-284 years ago and quit using it.Maybe a bad batch of powder.I don't know?
Steve
Re: H4831SC for 6x47
have never had problems with the Hod. extreme powders myself.
Were you using IMR4350?
have never had problems with the Hod. extreme powders myself.
Were you using IMR4350?
Re: H4831SC for 6x47
Take a look at this load info. Robert is extremely good at what he does; his data will be solid.
http://www.6mmhot.com/6mmHOT_Load_Info.html
JeffVN
Take a look at this load info. Robert is extremely good at what he does; his data will be solid.
http://www.6mmhot.com/6mmHOT_Load_Info.html
JeffVN
Re: H4831SC for 6x47
thanks... will do
thanks... will do
Re: H4831SC for 6x47
H4350 gets me 3175fps with the 105's. It is the only powder that I have tried.
H4350 gets me 3175fps with the 105's. It is the only powder that I have tried.
Re: H4831SC for 6x47
Sendero,
No.It was the H4350.It might be because 4350 is on the fast side for 6.5-284 with 140's.I got the gun in March worked up a load.Next time out one month later(hotter temps), was causing a sticky bolt.Went home,pulled bullets,worked up new load.Again one month later(even hotter temps) I had an exact repeat of the proceeding month,pissed off,went home pulled bullets.I switched to H4831 after that but the barrel was short lived.Since then I started doing ladder tests and that has helped.
6x47L,38.8 R-17,CCI450,115 B's,3120fps.........39.5 N-160,CCI450 115DTACS,3070fps
Steve
Steve
Sendero,
No.It was the H4350.It might be because 4350 is on the fast side for 6.5-284 with 140's.I got the gun in March worked up a load.Next time out one month later(hotter temps), was causing a sticky bolt.Went home,pulled bullets,worked up new load.Again one month later(even hotter temps) I had an exact repeat of the proceeding month,pissed off,went home pulled bullets.I switched to H4831 after that but the barrel was short lived.Since then I started doing ladder tests and that has helped.
6x47L,38.8 R-17,CCI450,115 B's,3120fps.........39.5 N-160,CCI450 115DTACS,3070fps
Steve
Steve
Re: H4831SC for 6x47
Yes the 4831 is to slow for this case. I have been using rl-15 and varget to get extra fps out of it because the 4350 was getting close to to slow as well. With 37.5 grains of rl-15 im gettin 3200fps with the 108 bib's.
Yes the 4831 is to slow for this case. I have been using rl-15 and varget to get extra fps out of it because the 4350 was getting close to to slow as well. With 37.5 grains of rl-15 im gettin 3200fps with the 108 bib's.
Re: H4831SC for 6x47
Maybe H380 or the newer Hybrid 100 would be good to try too...
Maybe H380 or the newer Hybrid 100 would be good to try too...
Re: H4831SC for 6x47
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: NotAGuru</div><div class="ubbcode-body">Yes the 4831 is to slow for this case. I have been using rl-15 and varget to get extra fps out of it because the 4350 was getting close to to slow as well. With 37.5 grains of rl-15 im gettin 3200fps with the 108 bib's. </div></div>
what barrel length ?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: NotAGuru</div><div class="ubbcode-body">Yes the 4831 is to slow for this case. I have been using rl-15 and varget to get extra fps out of it because the 4350 was getting close to to slow as well. With 37.5 grains of rl-15 im gettin 3200fps with the 108 bib's. </div></div>
what barrel length ?
Re: H4831SC for 6x47
3200-3250 is what we are getting with H4350 and 105 bergers. Barrel lengths range from 26-28". My 30" target rifle runs right at 3300 with the same load. We use H4350 and CCI450 primers. Most of our cases have 10-12 loadings on them.
3200-3250 is what we are getting with H4350 and 105 bergers. Barrel lengths range from 26-28". My 30" target rifle runs right at 3300 with the same load. We use H4350 and CCI450 primers. Most of our cases have 10-12 loadings on them.
