so after alot of looking around on the net i can't find the right mount to put a docter sight on my schmidt. i have seen the larue mount, and i can't find anything else for a 34 mm tube. i would like to keep my ring setup i have now, as i am not trying to buy my own set of rings for my work gun.(military) any help and pics would be greatly appreciated.
Rifle Scopes help finding a docter mount for scope
- Thread starter M C
- Start date
Re: help finding a docter mount for scope
How about the micro sight mount, about 3/4 down the page.
http://badgerordnance.com/mounts/
How about the micro sight mount, about 3/4 down the page.
http://badgerordnance.com/mounts/
Re: help finding a docter mount for scope
hi
I do ofcourse have a solution for it.
Both for doctor directly and also for Trijicon RMR.
Doctor interface mounted 12 o'clock on our .400 high spacer to come above the knobs. The interface can of course also be mounted directly on to the mount.
Trijicon RMR inteface mounted directly to our separate rings.
But this works of course as well togeteher with our unimounts as well.
Aimpoint T1 mounted on picatinny rail 3 o'clock onto our cantilever mount, but this works of course with all of our mounts.
T1 mounted on picatinnyrail as well as PEQ 15.
Simrad KN252 mounted on top of our older mount models, just don't have a pics of current solution, but we have it!
Our special rail solution for FLIR Snipe Ir thermal attachment.
So all the solutions are here, what are you waiting for?
Håkan
hi
I do ofcourse have a solution for it.
Both for doctor directly and also for Trijicon RMR.
Doctor interface mounted 12 o'clock on our .400 high spacer to come above the knobs. The interface can of course also be mounted directly on to the mount.
Trijicon RMR inteface mounted directly to our separate rings.
But this works of course as well togeteher with our unimounts as well.
Aimpoint T1 mounted on picatinny rail 3 o'clock onto our cantilever mount, but this works of course with all of our mounts.
T1 mounted on picatinnyrail as well as PEQ 15.
Simrad KN252 mounted on top of our older mount models, just don't have a pics of current solution, but we have it!
Our special rail solution for FLIR Snipe Ir thermal attachment.
So all the solutions are here, what are you waiting for?
Håkan
Re: help finding a docter mount for scope
Here is a version of Spuhr's mount with an Insight on it (same base as a Doctor)
I had the Badger version too, and prefer the Spuhr. The Badger requires use of a Pic Rail to mount the optic to the ring. Consequently it puts the optic pretty high. The built in interface of the Spuhr put the Doctor (or in my case Insight) closer to the maintube of the scope and less prone to snag.
Here is a version of Spuhr's mount with an Insight on it (same base as a Doctor)
I had the Badger version too, and prefer the Spuhr. The Badger requires use of a Pic Rail to mount the optic to the ring. Consequently it puts the optic pretty high. The built in interface of the Spuhr put the Doctor (or in my case Insight) closer to the maintube of the scope and less prone to snag.
Re: help finding a docter mount for scope
Thats p u r d y ^
Thats p u r d y ^
