FNg with questions on the range of adjustment on this scope the specs state 112cm/100m +/-. using these numbers I calculate 224 cm at 100m or 88 inches at 100m. Using a little trig I calculated 77 MOA. Does this sound correct. A review that I read stated the adjustment was approx. 18 mild or 62 MOA.
Rifle Scopes Hensoldt 4 X 16 FFP
- Thread starter txrpls
- Start date
Re: Hensoldt 4 X 16 FFP
Thanks but I am getting conflicting data. I read the specs as 112 up and 112 down. The windage is specified the same was as 50 cm / 100m +/-. I know the adjusting turret for elevation will turn more that one revolution and one revolution is 12 mils which would indicate more than 11.2 mils?
http://www.tacticalgunfan.com/index.php?option=com_content&task=view&id=631&Itemid=1
I apologize if posting the link is wrong.
Thanks but I am getting conflicting data. I read the specs as 112 up and 112 down. The windage is specified the same was as 50 cm / 100m +/-. I know the adjusting turret for elevation will turn more that one revolution and one revolution is 12 mils which would indicate more than 11.2 mils?
http://www.tacticalgunfan.com/index.php?option=com_content&task=view&id=631&Itemid=1
I apologize if posting the link is wrong.
Re: Hensoldt 4 X 16 FFP
You're right... 112 up and 112 down, from center. The center of the travel won't necessarily be your zero.
My 100yd zero is 4mils up from the bottom. Leaving me approx 18.4 useable mils of elevation.
You're right... 112 up and 112 down, from center. The center of the travel won't necessarily be your zero.
My 100yd zero is 4mils up from the bottom. Leaving me approx 18.4 useable mils of elevation.
Re: Hensoldt 4 X 16 FFP
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sobrbiker883</div><div class="ubbcode-body">
112cm/100m=11.2 mil/100m </div></div>
+/- that is.......
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sobrbiker883</div><div class="ubbcode-body">
112cm/100m=11.2 mil/100m </div></div>
+/- that is.......
Re: Hensoldt 4 X 16 FFP
Thanks. It looks like it should work on my GAP with a 20 MOA with out a problem.
Thanks. It looks like it should work on my GAP with a 20 MOA with out a problem.
Re: Hensoldt 4 X 16 FFP
You shouldn't have issue attaining a 100yd zero until you get in the neighborhood of a 40moa base.
You'll be fine.
You shouldn't have issue attaining a 100yd zero until you get in the neighborhood of a 40moa base.
You'll be fine.
Re: Hensoldt 4 X 16 FFP
If you use a base with 28 or 35 min you will have less down travel.(closer zero-stop)
If you use a base with 28 or 35 min you will have less down travel.(closer zero-stop)
Re: Hensoldt 4 X 16 FFP
A 30 or 40moa base will work very well with this scopes.
We have Hensoldt in stock.
Mike @ CST
A 30 or 40moa base will work very well with this scopes.
We have Hensoldt in stock.
Mike @ CST
Similar threads
