I wanted to know if anyone has taken off krylon paint from a HS precision stock? Any help would be greatly appreciated.
Thanks,
D
Thanks,
D
Gunsmithing How to take off krylon paint from HS stock?
- Thread starter dmatlosz
- Start date
Re: How to take off krylon paint from HS stock?
break cleaner will take it off. I don't know how it will effect the stock.
break cleaner will take it off. I don't know how it will effect the stock.
Re: How to take off krylon paint from HS stock?
yeah I was thinking about that but I didnt want to ruin the stock... I might just duracoat it. thoughts?
yeah I was thinking about that but I didnt want to ruin the stock... I might just duracoat it. thoughts?
Re: How to take off krylon paint from HS stock?
light careful sanding cant hurt. can it? i was texturing mine so i have been roughing it up. the black pebble finish comes off in a fine dusty powder. might take longer than you want, but sanding will get it off. possibly some of that pait stripper thats citrus based, not the chemical stuff that may eat the fiberglass and its resins, but the newer stuff. worth a look and a test on the inside maybe the barrel channel?
light careful sanding cant hurt. can it? i was texturing mine so i have been roughing it up. the black pebble finish comes off in a fine dusty powder. might take longer than you want, but sanding will get it off. possibly some of that pait stripper thats citrus based, not the chemical stuff that may eat the fiberglass and its resins, but the newer stuff. worth a look and a test on the inside maybe the barrel channel?
Re: How to take off krylon paint from HS stock?
I was hoping to keep the original finish... and just take off the krylon that was put on after(camo paint)...I guess there is no ideal way of doing it and keeping the original finish...
I was hoping to keep the original finish... and just take off the krylon that was put on after(camo paint)...I guess there is no ideal way of doing it and keeping the original finish...
Re: How to take off krylon paint from HS stock?
Would I be able to duracoat right over the krylon after I sand it down? Does anyone have any pictures of a duracoated PSS stock?
Thanks,
D
Would I be able to duracoat right over the krylon after I sand it down? Does anyone have any pictures of a duracoated PSS stock?
Thanks,
D
Re: How to take off krylon paint from HS stock?
<span style="font-family: 'Comic Sans MS'"> <span style="font-size: 11pt">I believe HS will refinish it for you for a reasonable price. Give them a call.
Bob </span> </span>
<span style="font-family: 'Comic Sans MS'"> <span style="font-size: 11pt">I believe HS will refinish it for you for a reasonable price. Give them a call.
Bob </span> </span>
Re: How to take off krylon paint from HS stock?
I have also used brake cleaner, and acetone on a factory HS stock with no effect to the factory finish.....
I have also used brake cleaner, and acetone on a factory HS stock with no effect to the factory finish.....
Re: How to take off krylon paint from HS stock?
Gents,
I want to thank you for all your helpful suggestions. I Love Forums!!!
Gents,
I want to thank you for all your helpful suggestions. I Love Forums!!!
Re: How to take off krylon paint from HS stock?
Forget stripping and start thinking repainting. Tape off the recoil pad and the bedding area; remove the sling studs. Scuff the stock with a Scotchbrite pad and then rub down with a tack rag soaked in acetone. Hang the stock by a wire/coat hanger; spray with Krylon Adhesion Promotor; wait ten minutes, follow with a coat of primer (as in a single thin coat). Follow in 10 minutes with a thin coat of Krylon, color of choice, then a second coat 10 minutes later. Set aside to cure for 24 hours; reinstall the studs, remove the tap, and your stock will look factory new. How do you think HSP refinishes their stocks?
Forget stripping and start thinking repainting. Tape off the recoil pad and the bedding area; remove the sling studs. Scuff the stock with a Scotchbrite pad and then rub down with a tack rag soaked in acetone. Hang the stock by a wire/coat hanger; spray with Krylon Adhesion Promotor; wait ten minutes, follow with a coat of primer (as in a single thin coat). Follow in 10 minutes with a thin coat of Krylon, color of choice, then a second coat 10 minutes later. Set aside to cure for 24 hours; reinstall the studs, remove the tap, and your stock will look factory new. How do you think HSP refinishes their stocks?
Re: How to take off krylon paint from HS stock?
i used acetone on mine. worked fine, no ill effects observed.
not a very efficient way of doing it though, acetone evaporates really fast. id try the citistrip or brake cleaner next time
i used acetone on mine. worked fine, no ill effects observed.
not a very efficient way of doing it though, acetone evaporates really fast. id try the citistrip or brake cleaner next time
Re: How to take off krylon paint from HS stock?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: D Mat</div><div class="ubbcode-body">i see a saturday project coming...
) </div></div>
Let us see how it turns out!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: D Mat</div><div class="ubbcode-body">i see a saturday project coming...
) </div></div>Let us see how it turns out!
Re: How to take off krylon paint from HS stock?
i used acetone on mine. worked fine, no ill effects observed.
not a very efficient way of doing it though, acetone evaporates really fast. id try the citistrip or brake cleaner next time
+1 on the acetone works very well
i used acetone on mine. worked fine, no ill effects observed.
not a very efficient way of doing it though, acetone evaporates really fast. id try the citistrip or brake cleaner next time
+1 on the acetone works very well
Similar threads
