I bit a big bullet, for me.. and ordered my Mcmillan A-5. I am looking forward to taking delivery of the stock sometime next week I hope. I will post pics as soon as I can.
I Did it...
- Thread starter reewik
- Start date
Re: I Did it...
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: reewik</div><div class="ubbcode-body">I bit a big bullet, for me.. and ordered my Mcmillan A-5. I am looking forward to taking delivery of the stock sometime next week I hope. I will post pics as soon as I can.
</div></div>
What kind of action and caliber are you going to put on this A5? I am sorry if I missed something
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: reewik</div><div class="ubbcode-body">I bit a big bullet, for me.. and ordered my Mcmillan A-5. I am looking forward to taking delivery of the stock sometime next week I hope. I will post pics as soon as I can.
</div></div>
What kind of action and caliber are you going to put on this A5? I am sorry if I missed something
Re: I Did it...
You missed nothing, I was thinking my description was in my sig...
Nothing special, I am putting my Rem 700 SPS 20" .308 in it.
You missed nothing, I was thinking my description was in my sig...
Nothing special, I am putting my Rem 700 SPS 20" .308 in it.
Re: I Did it...
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DesertHK</div><div class="ubbcode-body">Are you going to inlet it so that it takes the DBM?</div></div>
It is coming that way
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DesertHK</div><div class="ubbcode-body">Should be a nice rig. Are you going to bed it?</div></div>
Not yet. I want to get my action trued and at the same time I will probably have a good smith bed it too. I also want to replace the xpro for a timney. <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DesertHK</div><div class="ubbcode-body">Don't forget pictures ... </div></div>
No worries, will do!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DesertHK</div><div class="ubbcode-body">Are you going to inlet it so that it takes the DBM?</div></div>
It is coming that way
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DesertHK</div><div class="ubbcode-body">Should be a nice rig. Are you going to bed it?</div></div>
Not yet. I want to get my action trued and at the same time I will probably have a good smith bed it too. I also want to replace the xpro for a timney. <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DesertHK</div><div class="ubbcode-body">Don't forget pictures ... </div></div>
No worries, will do!
Re: I Did it...
Yes, I am.. I am shooting SMK 168's and 150's. OR Hornady 150 BTSP ( which are actually giving me the best groups) .
I am using IMR 4064 for my loads and I am usually using about 42 grains.
I am using Win brass and LC brass.
I am using Win LR primers.
I seat the 150's to 2.77 and the 168's to 2.80 OAL
Yes, I am.. I am shooting SMK 168's and 150's. OR Hornady 150 BTSP ( which are actually giving me the best groups) .
I am using IMR 4064 for my loads and I am usually using about 42 grains.
I am using Win brass and LC brass.
I am using Win LR primers.
I seat the 150's to 2.77 and the 168's to 2.80 OAL
Re: I Did it...
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: hydro556</div><div class="ubbcode-body">2.77"? </div></div>
Yes, sorry about that
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: hydro556</div><div class="ubbcode-body">2.77"? </div></div>
Yes, sorry about that
