Impact action in MDT ACC chassis

[bllistc]

Anyone else running this that can help me out? I'm trying to put the 737r action in the ACC chassis but the front action screw is too long and protruding into the action so its stopping the bolt from closing. Did you just file the action screw down or am I doing something wrong? I tried both the screws that came with the chassis and the action.

 

[spife7980]

Did it come with any washers to put under the bolt head? (dont know the impact/acc situation myself, just know similar situations occur)

 

[bllistc]

Did it come with any washers to put under the bolt head? (dont know the impact/acc situation myself, just know similar situations occur)

Yes there were washers with the acc chassis. I’m using them for both screws.

 

[spife7980]

Yes there were washers with the acc chassis. I’m using them for both screws.

Try both under the front? Thats how my krg was. If that doesnt fix it with the rear still not sticking too far through from the lack of washer depth then IDK.

 

[bllistc]

Ok. Figured it out talking to customer service. They sent me the wrong screw so I'm just going to file it down. FYI for anyone else that has this problem, the from action screw should measure 5/8"

The one I got is 1.25"

 

[spife7980]

Ok. Figured it out talking to customer service. They sent me the wrong screw so I'm just going to file it down. FYI for anyone else that has this problem, the from action screw should measure 5/8"

The one I got is 1.25"

OK, yeah thats a different issue than what I was thinking

Gonna take a shit load of washers!

 

[mark5pt56]

737 in the ACC and one in the ESS, using the supplied screws with no issues.

 

[Warpspeed]

Thanks for this thread - I have a 737 coming that will go into an ACC and now I'll be prepared.