Rifle Scopes info on height rings

[SAS_Sniper]

Hello everyones, i would like to put a S&B 5-25x56 on my 338 LM. My choice is between TPS or badger, but i can't decide about height...Now i have a NXS 30 mm tube and badger "hight" rings (.414" measured from base of ring to bottom of scope tube),and my scope fit(same 56 mm objective). I have 20 moa base and krieger HV #17.. for holders of badger or tps, what height do you recommend?
any advice would be appreciated. Thanks!

 

[Rob01]

1" height rings will work with that scope. Have used them on a 20 MOA base up to MTU contour barrels and has room for BC caps.

If you wanted to get the same height as your 30mm Badger High rings then get the Badger Med 34mm rings. Both are 1.125" from base to center of tube.

 

[SAS_Sniper]

Thank u Rob! Is aviable badger standard medium-hight..so should be fine...