• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Maggie’s Lets see your Billy Baroo

pmclaine

Gunny Sergeant
Full Member
Minuteman
  • Nov 6, 2011
    34,924
    69,273
    56
    MA


    When it absolutely has to be shot whats your Billy Baroo?

    Got mine in the car that causes me to act like Judge Smails.

    Pics after work.

    Take out your Billy Baroo today.
     
    My Billy, Billy, Billy....

    M40A1ish built by Raven Rifles, VA.

    1968 6 Digit Receiver cut to my spec. (close to M40 spec), original bolt
    M40 spec 1968 trigger/safety
    M40A3 Bottom Metal (DD Ross)
    M40A3 clone rail (TwoManAttack)
    M40A5 spec Rings (Badger)
    M40A5/6 (M110) M8451A Day scope Premier 3-15X ST (Commercial copy)
    M40A1 spec McMillan stock with added pod rail
    Kreiger SS 1/11.25, MTU @ 23 inches

    P2108423[1].jpg


    P2108422[1].jpg


    It flings FGMM 175s boringly consistent....A box of FGMM 4X5.

    P2108424[1].jpg
     
    Last edited:
    Started off with last Novembers ending 100 data -.1E/0.

    After first 5 went back to 0/0. The first one low on target 2, top right, settled the dope adjustment for the next 4 and so on.

    Temp 32, gusty wind mostly from behind so only a shooter annoyance, at 100 yards it aint mattering anyway. Shot them quick, less than 1/2 hour set up to take down.

    Heat has no effect on that truck axle.

    Its a bit weighty but compact and handy compared to my M40A1 musket.