I recently put a 20moa base on my rifle with a leupold mk4 3.5-9 x 40 with m3 knobs that are in inch moa and now I don't have enough elevation to go Down far enough to obtain a 100 yard zero are they a way to return to factory zeroed out since this was sighted on on a 0moa base ?
Rifle Scopes leupold mk4 zero question
- Thread starter urmaker45
- Start date
Read the instructions on how to adjust the elevation correctly for the zero distance you want. FYI,... The zero stop is built into the knob, not the erector assy.
loosen set screws on knob. while up against the zero stop.
turn knob up 10 moa. tighten set screws.
punch yourself in the dick
now you can adjust father down
there is a little nub on the knob that is your zero stop. i alway take my allen wrench when i go to zero my mark 4 incase i have to go below the zero on the knob to sight in.
turn knob up 10 moa. tighten set screws.
punch yourself in the dick
now you can adjust father down
there is a little nub on the knob that is your zero stop. i alway take my allen wrench when i go to zero my mark 4 incase i have to go below the zero on the knob to sight in.
