Tweaking some things and debating on charge weight. IMR4064/168 SMK at 2.80, once fired and full length sized BH brass, standard RCBS dies, FGM primers. After first target, went .3 up/left, moved .1 right after second. I marked what I felt were called shots, not just because they were off, they were called. Right now my inclination is 41.8, all charges seem in the relative same spot if a composite was over laid.
For some odd reason, can't get the MS to pick up the shots, had a similar issue with another semi where there's minimal barrel space but the muzzle is still where it should be per instructions. Bore aligned properly as well, anyone else have this issue with a semi? Bolts are fine with the MS.
Likes the BH factory though. The ball loads are with Hornady 3037 bullet.
Fired rounds are top to bottom, left to right, 41.6/8/42
Mark
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i.imgur.com\/jOcY8bE.jpg"}[/IMG2]
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i.imgur.com\/nWqowyO.jpg"}[/IMG2]
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i.imgur.com\/5whXC0N.jpg"}[/IMG2]
For some odd reason, can't get the MS to pick up the shots, had a similar issue with another semi where there's minimal barrel space but the muzzle is still where it should be per instructions. Bore aligned properly as well, anyone else have this issue with a semi? Bolts are fine with the MS.
Likes the BH factory though. The ball loads are with Hornady 3037 bullet.
Fired rounds are top to bottom, left to right, 41.6/8/42
Mark
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i.imgur.com\/jOcY8bE.jpg"}[/IMG2]
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i.imgur.com\/nWqowyO.jpg"}[/IMG2]
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i.imgur.com\/5whXC0N.jpg"}[/IMG2]