was wondering if somebody could share some info im running a 18" 1 and 10, wanting to run 175 and varget. could use some help thank you for looking
- Thread starter poff6401
- Start date
Re: load for 18"
If you take the time to go thru the reloading forum you'll find alot of info.I dont think it will matter what barrel lenght you have ,all the 308 loads are in the same boat for bullets powder, brass and primers.Heres a link of some info.start low and work up,each rifle will vary.
http://www.snipershide.com/forum/ubbthre...857#Post2086857
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=323517#Post323517
If you take the time to go thru the reloading forum you'll find alot of info.I dont think it will matter what barrel lenght you have ,all the 308 loads are in the same boat for bullets powder, brass and primers.Heres a link of some info.start low and work up,each rifle will vary.
http://www.snipershide.com/forum/ubbthre...857#Post2086857
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=323517#Post323517
Re: load for 18"
Start at 43 grains and work your way to 45 you should find 1-2 areas where you get more accuracy than the others (probably 43-43.5 and 44.5-45).
Start at 43 grains and work your way to 45 you should find 1-2 areas where you get more accuracy than the others (probably 43-43.5 and 44.5-45).
