MagPul Stock Mod

[Bigjake83]

Not sure if im late to this party but I picked up a MOE-PR Stock to find out if the Larue Riser would be compatible, I wanted to test it out on the cheap MOE first before I buy one of the DT-PR to Mod. Sure enough.... one Beer later it came together.

​

 

[Charmingmander]

Nice. Always liked that product.

 

[AustinP69]

For my face and a normal 1.54ish height mount- the Larue risr is jusssttt a bit too high for me.

The magpul .5 in riser works better for me by being slightly lower (like .1 in or something but makes a difference), albeit without the slidey ability to charge the CH with stock collapsed

 

[bfoosh006]

Just an FWIW... another guys added LaRue RISR add-on to his Magpul DT PR stock.

https://www.ar15.com/forums/AR-15/Magpul-DT-PR-stock-Larue-RISR/118-787658/

An BTW, what size screw did you use ?

 

[Steel+Killer]

Not sure if im late to this party but I picked up a MOE-PR Stock to find out if the Larue Riser would be compatible, I wanted to test it out on the cheap MOE first before I buy one of the DT-PR to Mod. Sure enough.... one Beer later it came together.

So you bought a $45.00 stock just to make sure it would work on a $65.00 stock? Am I following this correctly? Surly I am missing something!

Gun Stocks - Firearm Stocks

Magpul provides high quality gun and firearm stocks for enhanced weapon control for the shooting enthusiast. Visit us to shop our products!

magpul.com

 

[Bigjake83]

So you bought a $45.00 stock just to make sure it would work on a $65.00 stock? Am I following this correctly? Surly I am missing something!

Gun Stocks - Firearm Stocks

Magpul provides high quality gun and firearm stocks for enhanced weapon control for the shooting enthusiast. Visit us to shop our products!

magpul.com

No.. I bought a $35 stock to find out if it's compatible with the LARUE Riser. If im going to permanently Modifying a stock I'm sure as hell not going to experiment on more costly option.

Does that explain everything,
Or do I need to draw it in Crayon?

 

[Bigjake83]

Just an FWIW... another guys added LaRue RISR add-on to his Magpul DT PR stock.

https://www.ar15.com/forums/AR-15/Magpul-DT-PR-stock-Larue-RISR/118-787658/

An BTW, what size screw did you use ?

The same screws that came in the Riser kit, I'm not sure why he made the modifications he did, it's not needed.

 

[Steel+Killer]

Does that explain everything,
Or do I need to draw it in Crayon?

The stock you really want is $20 more than the one you bought to "test" that's like almost four beers in a bar!

Man, who can argue with that kind of sound financial logic Dave Ramsey would be proud!

 

[bfoosh006]

The stock you really want is $20 more than the one you bought to "test" that's like almost four beers in a bar!

Man, who can argue with that kind of sound financial logic Dave Ramsey would be proud!

Who else gives a sh_t how someone else spends THEIR money... ?
I'd bet a lot of people have bought parts for experimenting with... geez

Anyway Thanks Again, bigjake83

 

[hlee]

Is there anyone that owns more than 2 ARs that does NOT have 2 or 3 CTRs just kicking around in a box?

 

[Steel+Killer]

Who else gives a sh_t how someone else spends THEIR money... ?
I'd bet a lot of people have bought parts for experimenting with... geez

Anyway Thanks Again, bigjake83

I don't give a fuck about how anyone spends their money I was merely pointing out how for a mere $20 more bucks he could have gone with the one he really wanted, and not put $45 into the one he didn't, but hey I get it everyone looks at things different. It's just my opinion not saying it's right or wrong.

 

[LRRPF52]

That looks really good with the LaRue RISR:

 

[Trigger Monkey]

What's the consensus on the DT PR stock? I don't want to fall into another PRS Lite trap.

 

[Cascade Hemi]

What's the consensus on the DT PR stock? I don't want to fall into another PRS Lite trap.

It's a nice stock for $65. The price reflects what you're getting and what you aren't.

 

[roostercogburn98]

so this is basically an updated version of the CTR riser for the MOE/CTR stocks? Bit it uses screws to hold in place?

 

[hlee]

so this is basically an updated version of the CTR riser for the MOE/CTR stocks? Bit it uses screws to hold in place? View attachment 8499488

Not exactly. The Larue RISR reciprocates to get out of the way of the charging handle.

 

[higginsworksforme]

Are the DT and non-DT the same externally save for the qd cup? I assume they are but the photos on the site make the bag rider portion look different.

 

[Cascade Hemi]

Are the DT and non-DT the same externally save for the qd cup? I assume they are but the photos on the site make the bag rider portion look different.

No. The MOE-PR has an open cavity on the bottom. The DT-PR is subtly different in almost every dimension except the top.

 

[higginsworksforme]

That seems like a weird business decision.

 

[Kamerad]

Anyone know if it is compatible with the Fixed rifle length MOE stock, Mag404?

 

[ZA206]

@Bigjake83

Is that black piece on the Rizr an add on soft cheek piece? Where did you get it?

-ZA

 

[Bigjake83]

@Bigjake83

Is that black piece on the Rizr an add on soft cheek piece? Where did you get it?

-ZA

Hey Brother,

Yeah it's a add on, I'll have to look for the packaging since I im out of them now.

Basically I buy several of them that come in 10"10" sheets and I cut them to fit.

 

[the monk]

So did you drill holes and use the same screws that came with it along with the metal backers?

 

[Bigjake83]

So did you drill holes and use the same screws that came with it along with the metal backers?

Yes Sir!

 

[the monk]

This worked great. Thanks!

 

[ZA206]

How much extra height does the LaRue RISR add at 12 o'clock & at 2 o'clock (about where your cheek would touch)???
I'm interested in getting one of these, but I can simulate the riser height with some cardboard & duct tape to see if it would work with one of my CTR stocks...

 

[the monk]

How much extra height does the LaRue RISR add at 12 o'clock & at 2 o'clock (about where your cheek would touch)???
I'm interested in getting one of these, but I can simulate the riser height with some cardboard & duct tape to see if it would work with one of my CTR stocks...

12:00 = .64
1:00 = .58
2:00 = .45

These measurements are off the initial height of the Magpul stock.

 

[faylix]

I use automotive alcanterra wrap on all my cheek pieces. I got the idea from the AGrip Glock grips. It works really well wet or dry and stands up to the abuse.

I have the DT PR and it feels like a PRS lite - with an excellent bag rider.

 

[Bluedog82]

I like the DT PR a lot. A little hack you can do is chop an MOE cheek riser down the middle and run it on the back clip section of the stock. You can still charge the rifle just fine.