MDT stock classic chassis for F class

[Akrbcl1]

I have MDT‘s classic chassis on order to shoot an F class. I am looking for a nylon or some compatible to ride underneath my Forstock. The width should be something like 3 inches wide and 10 inches long does anyone know where you can purchase such an item?
Please look at the gun under the one on top you can see there is a nylon or plastic riding plate. That’s what I’m looking for and MDT is no help.

 

[Hoser]

Try cutting up a cutting board and some screws.

 

[stanley_white]

Five inches long X 2 = 10 inches.

You will need 10 inches of MLOK picatinny rail to attach to the stock, then attach the bag rider to the rail.

3 INCH BENCHREST PICATINNY FRONT BAG RIDER

Precision Rifle Shooting Accessories

theurbanriflemanstore.com

-Stan

 

[b6graham]

https://xlrindustries.com/collections/accessories/products/m-lok-bench-rest-guide-plate

like this?

 

[ubettcha]

If your cheap a piece of 1x6 azek countersink some 1/4-20 screws and use washers under the nylock nuts. Use a router with a round over bit on the edges and done. You can goto a jobsite and pick up a scrap piece of azek nuts and bolts 4 bucks and the rest of the cost is your time and a can a krylon plastic paint