Rifle Scopes Mill
- Thread starter jwp475
- Start date
Re: Mill
Should have made this a poll, just for grins.
Should have made this a poll, just for grins.
Re: Mill
3.6 inches at 100yds, 36 inches at 1000 yards.
3.6 inches at 100yds, 36 inches at 1000 yards.
Re: Mill
One Mill at 100 or 1000 yards is useless. Put it in a shop and you will be much happier with the results.
One Mill at 100 or 1000 yards is useless. Put it in a shop and you will be much happier with the results.
Re: Mill
A mil is a mil at any range. Who cares what it is in inches if you're dialing mils no need to worry about inches. Ever.
A mil is a mil at any range. Who cares what it is in inches if you're dialing mils no need to worry about inches. Ever.
Re: Mill
Read this
http://www.tracearmory.com/forums.html#/20101111/basic-use-of-the-mil-dot-optic-211376/
Let me know if it helps any.
Read this
http://www.tracearmory.com/forums.html#/20101111/basic-use-of-the-mil-dot-optic-211376/
Let me know if it helps any.
Re: Mill
Your joking right?
Your joking right?
Re: Mill
Look under the "reviews of equipment and training" for the post J.Boyette is referring to.
Look under the "reviews of equipment and training" for the post J.Boyette is referring to.
Re: Mill
2 * pi radians = 360 degrees
1 radian = 360degrees/2*pi
1/1000 radian = 360degrees/2*pi*1000
Now, 360 degrees is the circumference of a circle so substitute 2*pi*r for 360 degrees. Note that 1mill = 1/1000th radian
1/1000 radian = 2*pi*r/2*pi*1000
The 2*pi's cancel and we are left with
1/1000th radian = r/1000 for any r.
So one milliradian is 1 in 1000.
1 meter in 1000 meters
10cm in 100 meters
1" in 1000"
3.6" in 1000 yards (which is 3600")
and so on
The general formula is for ranging is:
target size/# of mils = target distance/1000
2 * pi radians = 360 degrees
1 radian = 360degrees/2*pi
1/1000 radian = 360degrees/2*pi*1000
Now, 360 degrees is the circumference of a circle so substitute 2*pi*r for 360 degrees. Note that 1mill = 1/1000th radian
1/1000 radian = 2*pi*r/2*pi*1000
The 2*pi's cancel and we are left with
1/1000th radian = r/1000 for any r.
So one milliradian is 1 in 1000.
1 meter in 1000 meters
10cm in 100 meters
1" in 1000"
3.6" in 1000 yards (which is 3600")
and so on
The general formula is for ranging is:
target size/# of mils = target distance/1000
Re: Mill
If you fucking people dont have a clue milling within the 3 second rule then get a mildotmaster.
If you fucking people dont have a clue milling within the 3 second rule then get a mildotmaster.
Re: Mill
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sniper2ndrep</div><div class="ubbcode-body">If you fucking people dont have a clue milling within the 3 second rule then get a mildotmaster. </div></div>
Sir,
This site is to help people to learn things. So help this person learn or just keep looking on.
your words do nothing but make you look like an ass.
John
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sniper2ndrep</div><div class="ubbcode-body">If you fucking people dont have a clue milling within the 3 second rule then get a mildotmaster. </div></div>
Sir,
This site is to help people to learn things. So help this person learn or just keep looking on.
your words do nothing but make you look like an ass.
John
Re: Mill
BTW Boyette people still wating for their refunds.
BTW Boyette people still wating for their refunds.
Re: Mill
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: azimutha</div><div class="ubbcode-body">Can someone lock this thread? This guy (sniper2ndrep) adds nothing good to this forum. </div></div>
I like how after you posted this he deleted his worst posts. Classy. Hopefully the admin can still see them. I was hoping to read something that taught me something new about mil use. Instead I have to read this guys ridiculousness.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: azimutha</div><div class="ubbcode-body">Can someone lock this thread? This guy (sniper2ndrep) adds nothing good to this forum. </div></div>
I like how after you posted this he deleted his worst posts. Classy. Hopefully the admin can still see them. I was hoping to read something that taught me something new about mil use. Instead I have to read this guys ridiculousness.
Re: Mill
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sniper2ndrep</div><div class="ubbcode-body">BTW Boyette people still wating for their refunds. </div></div>
Sir,
Who are you talking about and BTW what are you talking about?
John
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sniper2ndrep</div><div class="ubbcode-body">BTW Boyette people still wating for their refunds. </div></div>
Sir,
Who are you talking about and BTW what are you talking about?
John
Re: Mill
1 mill is 10cm at 100m , 0.1 mill is 1cm at 100m ,1 mill at 1000m is 100cm
1 mill at 100yds is3.6" , 0.1 mill at 100yds is 0.36"
1 mill = 3.438 moa
it dose not really mater what a mill is you will start to think of it in mill after a wile
sniper2ndrep don't think what you said was called for , if you know so much about it why no help your fellow shooter out?
1 mill is 10cm at 100m , 0.1 mill is 1cm at 100m ,1 mill at 1000m is 100cm
1 mill at 100yds is3.6" , 0.1 mill at 100yds is 0.36"
1 mill = 3.438 moa
it dose not really mater what a mill is you will start to think of it in mill after a wile
sniper2ndrep don't think what you said was called for , if you know so much about it why no help your fellow shooter out?
Similar threads
Rifle Scopes Scope Magnification