• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Mount for Pulsar Thermion 2 for AR and bolt?

Sogan

Sergeant
Full Member
Minuteman
Jun 11, 2013
1,451
535
Will a normal cantilever mount allow me to have the correct eye relief with the thermion for both an AR-15 and a bolt gun? Ideally I want to mount it in the rings once and then be able to move the entire mount forward and back to get the correct eye relief on each gun type.

And if so, what mount height do I need to work on both?
 
Last edited:

works perfectly.
 
The ADM will serve you well but be mindful that in order to obtain proper scope height on the AR, it is more than likely going to cause it to be too high on the bolt gun….resulting in not having a solid cheek weld to the stock. If you have a chassis type stock with an adjustable cheek piece then not a big deal as it can be raised to the right height. But otherwise you will need to add a pad or foam to a traditional stock to get lined up correctly with the scope.