MPA, Curtis Axiom. What mags are you guys using?

[abn31c]

Just got a BA Comp and its not liking my loads with the magpul.
Thnx

 

[021411]

Just got a BA Comp and its not liking my loads with the magpul.
Thnx

I'm sure you're aware but you'll have to modify the Magpul mags. With that said, I scored some MDT 12rd mags during Black Fri and they work fine so far. I'm also using an MPA Comp chassis and Axiom.

 

[021411]

Just three dummy rounds..

 

[abn31c]

Im shooting 140 hybrids at 2.86 and the mag has alot of slop. Ill order some MDT. Thanks.

 

[021411]

Im shooting 140 hybrids at 2.86 and the mag has alot of slop. Ill order some MDT. Thanks.

Let me load up a dummy with a 140 Hybrid at 2.86. Stand by..

 

[021411]

It's fine loaded at 2.86. I just tested a round. No issues at least with my set up.

 

[abn31c]

Very good, appreciate the help. Out of curiosity what load are you runing? I just did basics today to try to get something for a match next weekend. Gun is brand new.

 

[021411]

Very good, appreciate the help. Out of curiosity what load are you runing? I just did basics today to try to get something for a match next weekend. Gun is brand new.

My rifle is chambered in 6.5 CM. I settled on 140gr ELD-M seated at 2.19 base to ogive. 41.7gn of H4350 and Hornady brass. I need to find a higher speed node eventually. Right now I'm averaging 2738 fps but it's accurate enough. I'm not done experimenting yet.

 

[abn31c]

I put 5 140 eldms thru mine at 2.18 and 42.5 of h4350. Shot very well. But I have about 700 hybrids left. I will probably revisit eldm next week. Again thanks for the help.

 

[abn31c]

UPDATE
Got my MDT mags and ran em in a match today, flawless and fit great.

 

[mjsand44]

Will the MDT mags work in the MPA / Bighorn action? I could not get the magpul to feed without pushing the mag up in the receiver. I contacted MPA and they sent me a new mag catch and it's better but if I load 10 I might get the first 5 or 6 to feed.
Thanks

 

[abn31c]

I cant help you with the bighorn, but I also tried AI and ARC. Both worked fine in mine with no mods.

 

[MDT_Josh]

Will the MDT mags work in the MPA / Bighorn action? I could not get the magpul to feed without pushing the mag up in the receiver. I contacted MPA and they sent me a new mag catch and it's better but if I load 10 I might get the first 5 or 6 to feed.
Thanks

Should work just fine I know quite a few shooters using our magazines in TL3's with no issues.

 

[King_beardsly]

I'm running the 12rd's on a big horn origin and they feed like a dream